Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green DDR5 RDIMM module, 288 pins, no heat spreader, 32GB capacity

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-G4M0-QBAC1

32 GB DDR5-5600 ECC registered RDIMM built for the Supermicro H14DST-FL server board

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

Vedeți celelalte 30 configurații

Versiunile tăiate există, dar nu sunt disponibile aici.

  • 32 GB capacity lets the Supermicro H14DST-FL run fully populated at rated speed
  • DDR5 5600 (PC5-44800) speed with CL46 latency matches the board's memory-controller expectations
  • 1 V operation and 2Rx8 registered ECC design offload the controller for stable full-load operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin RDIMM form factor is the exact module type the H14DST-FL requires

Exact DDR5-5600 RDIMM for Supermicro H14DST-FL

This 32 GB registered ECC module matches the memory controller requirements of the Supermicro H14DST-FL motherboard. It is built for servers and workstations that need error-correcting memory running at the board's rated speed and voltage. The 288-pin RDIMM form factor fits the DIMM slots this platform provides.

Registered 2Rx8 ECC at 1.1 V and CL46

The module operates at DDR5-5600 (PC5-44800) with a CAS latency of 46, 1.10 V supply, and a dual-rank 2Rx8 organisation. Registered buffering offloads the memory controller so every populated slot runs at full capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Simple slot installation if population rules are

The RDIMM seats in the standard 288-pin DDR5 slots, but the board's manual dictates which slots must be filled first and how many modules are supported per channel. Ignoring that order is the most common reason a server fails to recognise the full capacity or boots at a reduced speed.

Puncte forte

  • 32 GB capacity lets the Supermicro H14DST-FL run fully populated at rated speed
  • DDR5 5600 (PC5-44800) speed with CL46 latency matches the board's memory-controller expectations
  • 1 V operation and 2Rx8 registered ECC design offload the controller for stable full-load operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin RDIMM form factor is the exact module type the H14DST-FL requires

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will 5600 MHz run at 5600 MHz in my Supermicro H14DST-FL?

The module is spec-matched to the H14DST-FL, so the memory controller recognises the exact rank, voltage and timing and runs the DIMM at its rated 5600 MHz.

What does PC5-44800 mean for daily throughput?

PC5-44800 is the DDR5-5600 standard designation; the registered ECC design keeps every populated slot stable at that data rate.

Does the 288-pin RDIMM fit the H14DST-FL slots?

Yes, the board requires 288-pin registered DIMMs; this module matches that form factor and the 1.1 V operating voltage.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.