暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-G4M0-QBAC1

32 GB DDR5-5600 ECC registered RDIMM built for the Supermicro H14DST-FL server board

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity lets the Supermicro H14DST-FL run fully populated at rated speed
  • DDR5 5600 (PC5-44800) speed with CL46 latency matches the board's memory-controller expectations
  • 1 V operation and 2Rx8 registered ECC design offload the controller for stable full-load operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin RDIMM form factor is the exact module type the H14DST-FL requires

Exact DDR5-5600 RDIMM for Supermicro H14DST-FL

This 32 GB registered ECC module matches the memory controller requirements of the Supermicro H14DST-FL motherboard. It is built for servers and workstations that need error-correcting memory running at the board's rated speed and voltage. The 288-pin RDIMM form factor fits the DIMM slots this platform provides.

Registered 2Rx8 ECC at 1.1 V and CL46

The module operates at DDR5-5600 (PC5-44800) with a CAS latency of 46, 1.10 V supply, and a dual-rank 2Rx8 organisation. Registered buffering offloads the memory controller so every populated slot runs at full capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Simple slot installation if population rules are

The RDIMM seats in the standard 288-pin DDR5 slots, but the board's manual dictates which slots must be filled first and how many modules are supported per channel. Ignoring that order is the most common reason a server fails to recognise the full capacity or boots at a reduced speed.

特長

  • 32 GB capacity lets the Supermicro H14DST-FL run fully populated at rated speed
  • DDR5 5600 (PC5-44800) speed with CL46 latency matches the board's memory-controller expectations
  • 1 V operation and 2Rx8 registered ECC design offload the controller for stable full-load operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin RDIMM form factor is the exact module type the H14DST-FL requires

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will 5600 MHz run at 5600 MHz in my Supermicro H14DST-FL?

The module is spec-matched to the H14DST-FL, so the memory controller recognises the exact rank, voltage and timing and runs the DIMM at its rated 5600 MHz.

What does PC5-44800 mean for daily throughput?

PC5-44800 is the DDR5-5600 standard designation; the registered ECC design keeps every populated slot stable at that data rate.

Does the 288-pin RDIMM fit the H14DST-FL slots?

Yes, the board requires 288-pin registered DIMMs; this module matches that form factor and the 1.1 V operating voltage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。