Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR4 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4×16GB) DDR4-3200 ECC UDIMM CL22 1.2V 288-pin memory upgrade

SKU CH-HVTD-8CCJQ

64 GB DDR4-3200 ECC UDIMM kit (4×16 GB, CL22, 1.2 V) verified for Supermicro X12STE-F and X12STD-F motherboards

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 64GB 4X16GB

  • Error-correcting code protects data integrity
  • 64 GB total capacity across four 16 GB modules
  • 3200 MT/s DDR4 speed with CL22 latency
  • 2 V low-voltage operation reduces power draw
  • Verified fit for Supermicro X12STE-F and X12STD-F motherboards

Exact-fit 64 GB DDR4-3200 ECC kit

This 64 GB kit contains four 16 GB DDR4-3200 UDIMM modules rated at PC4-25600 with CL22 latency and 1.20 V operation. Each module is a 288-pin unbuffered ECC DIMM built with 1Rx8 organisation using major-brand Samsung, Micron or Hynix chips. The kit is validated for Supermicro X12STE-F and X12STD-F motherboards.

Suited for ECC workstations

Builders populating Supermicro X12STE-F or X12STD-F boards with the exact rank, voltage and timing the memory controller expects will get full-capacity recognition at rated speed. Systems that require registered RDIMMs, SODIMM form factors, non-ECC memory or capacities beyond 64 GB cannot use this kit.

Steady ECC correction under sustained load

Error-correcting code detects and corrects single-bit errors continuously, preventing silent data corruption during long compute runs. Unbuffered topology keeps latency low at CL22 while the 1.20 V supply maintains stable operation without extra cooling. The 1Rx8 rank layout follows the board's population rules for consistent throughput over extended sessions.

Puncte forte

  • Error-correcting code protects data integrity
  • 64 GB total capacity across four 16 GB modules
  • 3200 MT/s DDR4 speed with CL22 latency
  • 2 V low-voltage operation reduces power draw
  • Verified fit for Supermicro X12STE-F and X12STD-F motherboards

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

My Supermicro X12STE-F currently has empty DDR4 slots — do I need any other components for this 64 GB (4×16 GB) kit to work?

The motherboard and a compatible CPU are required; the kit itself contains four 288-pin DDR4-3200 ECC UDIMMs that plug directly into the board's memory slots with no extra hardware.

If I keep two 16 GB DDR4-3200 ECC UDIMMs already installed, will this 1Rx8 CL22 kit operate correctly in the remaining slots?

The board's memory-population rules determine whether mixed ranks and capacities are allowed; consult the Supermicro manual for the approved DIMM order before adding this 4×16 GB kit alongside existing modules.

After installing all four modules, how can I confirm the system is running the full 64 GB at DDR4-3200 with ECC active?

Check the BIOS memory information screen or the operating system's memory report — both should show 64 GB total, 3200 MT/s speed, and ECC enabled.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.