NEMIX RAM 64GB (2x32GB) DDR4 2933MHz ECC UDIMM CL21 1.2V 288-Pin memory upgrade
- 64GB (2 x 32GB)
- 288-Pin DDR4 ECC UD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
64 GB DDR4-3200 ECC UDIMM kit (4×16 GB, CL22, 1.2 V) verified for Supermicro X12STE-F and X12STD-F motherboards
Size 64GB 4X16GB
This 64 GB kit contains four 16 GB DDR4-3200 UDIMM modules rated at PC4-25600 with CL22 latency and 1.20 V operation. Each module is a 288-pin unbuffered ECC DIMM built with 1Rx8 organisation using major-brand Samsung, Micron or Hynix chips. The kit is validated for Supermicro X12STE-F and X12STD-F motherboards.
Builders populating Supermicro X12STE-F or X12STD-F boards with the exact rank, voltage and timing the memory controller expects will get full-capacity recognition at rated speed. Systems that require registered RDIMMs, SODIMM form factors, non-ECC memory or capacities beyond 64 GB cannot use this kit.
Error-correcting code detects and corrects single-bit errors continuously, preventing silent data corruption during long compute runs. Unbuffered topology keeps latency low at CL22 while the 1.20 V supply maintains stable operation without extra cooling. The 1Rx8 rank layout follows the board's population rules for consistent throughput over extended sessions.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC Unbuffered UDIMM Memory |
| Part Number | ME25600-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The motherboard and a compatible CPU are required; the kit itself contains four 288-pin DDR4-3200 ECC UDIMMs that plug directly into the board's memory slots with no extra hardware.
The board's memory-population rules determine whether mixed ranks and capacities are allowed; consult the Supermicro manual for the approved DIMM order before adding this 4×16 GB kit alongside existing modules.
Check the BIOS memory information screen or the operating system's memory report — both should show 64 GB total, 3200 MT/s speed, and ECC enabled.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?