We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 UDIMM modules in a row

NEMIX RAM

NEMIX RAM 128GB 4X32GB DDR4 2933MHz PC4-23400 CL21 1.2V 2Rx8 UDIMM memory upgrade

SKU CH-QB87-20GVZ

A 128 GB kit of four 32 GB DDR4 2933 MHz CL21 1.2 V 2Rx8 UDIMM modules verified for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 128GB 4X32GB

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR4-2933 (PC4-23400) speed matches the board's rated frequency
  • CL21 latency at 1.20 V delivers stable operation
  • 2Rx8 unbuffered UDIMM form factor fits Supermicro X12SAE and X12SCA-F motherboards
  • Built with Samsung, Micron or Hynix chips and tested at rated specifications

Exact-match DDR4 kit for Supermicro

This 128 GB kit delivers four 32 GB DDR4-2933 UDIMM modules rated at CL21 and 1.20 V. The 2Rx8 rank structure and 288-pin unbuffered design match the memory controller expectations of the Supermicro X12SAE and X12SCA-F motherboards so the full capacity is recognised at rated speed.

Major OEM chips tested at spec

Modules are built with Samsung Micron or Hynix components and validated for stability at the stated frequency timing and voltage. The kit contains only the four DIMMs with no heat spreaders or additional accessories included.

Suits Supermicro desktop board upgrades

Builders expanding a compatible Supermicro X12SAE or X12SCA-F system to 128 GB will find this kit drops in without configuration changes. It is not suitable for servers requiring ECC or registered DIMMs nor for platforms limited to lower densities or different DDR generations.

Highlights

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR4-2933 (PC4-23400) speed matches the board's rated frequency
  • CL21 latency at 1.20 V delivers stable operation
  • 2Rx8 unbuffered UDIMM form factor fits Supermicro X12SAE and X12SCA-F motherboards
  • Built with Samsung, Micron or Hynix chips and tested at rated specifications

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 288-pin DDR4 UDIMM modules need a heat spreader added later?

The modules ship without a heat spreader. Standard case airflow is sufficient for 1.2 V DDR4-2933 CL21 operation; no aftermarket cooling is required.

What limit appears first during sustained load on the 2Rx8 32 GB sticks?

The memory controller's maximum supported capacity and ranked-DIMM population rules cap usable memory before bandwidth or thermal limits are reached.

How much power and heat does the 128 GB kit produce running all day?

At 1.20 V the four modules draw minimal power and generate little heat; typical desktop airflow keeps temperatures well within DDR4 operating range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.