暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR4 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4×16GB) DDR4-3200 ECC UDIMM CL22 1.2V 288-pin memory upgrade

SKU CH-HVTD-8CCJQ

64 GB DDR4-3200 ECC UDIMM kit (4×16 GB, CL22, 1.2 V) verified for Supermicro X12STE-F and X12STD-F motherboards

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 64GB 4X16GB

  • Error-correcting code protects data integrity
  • 64 GB total capacity across four 16 GB modules
  • 3200 MT/s DDR4 speed with CL22 latency
  • 2 V low-voltage operation reduces power draw
  • Verified fit for Supermicro X12STE-F and X12STD-F motherboards

Exact-fit 64 GB DDR4-3200 ECC kit

This 64 GB kit contains four 16 GB DDR4-3200 UDIMM modules rated at PC4-25600 with CL22 latency and 1.20 V operation. Each module is a 288-pin unbuffered ECC DIMM built with 1Rx8 organisation using major-brand Samsung, Micron or Hynix chips. The kit is validated for Supermicro X12STE-F and X12STD-F motherboards.

Suited for ECC workstations

Builders populating Supermicro X12STE-F or X12STD-F boards with the exact rank, voltage and timing the memory controller expects will get full-capacity recognition at rated speed. Systems that require registered RDIMMs, SODIMM form factors, non-ECC memory or capacities beyond 64 GB cannot use this kit.

Steady ECC correction under sustained load

Error-correcting code detects and corrects single-bit errors continuously, preventing silent data corruption during long compute runs. Unbuffered topology keeps latency low at CL22 while the 1.20 V supply maintains stable operation without extra cooling. The 1Rx8 rank layout follows the board's population rules for consistent throughput over extended sessions.

特長

  • Error-correcting code protects data integrity
  • 64 GB total capacity across four 16 GB modules
  • 3200 MT/s DDR4 speed with CL22 latency
  • 2 V low-voltage operation reduces power draw
  • Verified fit for Supermicro X12STE-F and X12STD-F motherboards

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

My Supermicro X12STE-F currently has empty DDR4 slots — do I need any other components for this 64 GB (4×16 GB) kit to work?

The motherboard and a compatible CPU are required; the kit itself contains four 288-pin DDR4-3200 ECC UDIMMs that plug directly into the board's memory slots with no extra hardware.

If I keep two 16 GB DDR4-3200 ECC UDIMMs already installed, will this 1Rx8 CL22 kit operate correctly in the remaining slots?

The board's memory-population rules determine whether mixed ranks and capacities are allowed; consult the Supermicro manual for the approved DIMM order before adding this 4×16 GB kit alongside existing modules.

After installing all four modules, how can I confirm the system is running the full 64 GB at DDR4-3200 with ECC active?

Check the BIOS memory information screen or the operating system's memory report — both should show 64 GB total, 3200 MT/s speed, and ECC enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。