暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green circuit boards with black memory chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 2933MHz ECC UDIMM CL21 1.2V 288-Pin memory upgrade

SKU CH-2ZYQ-18RWX

64 GB DDR4 ECC UDIMM kit (2 × 32 GB) at 2933 MHz CL21 1.2 V, validated for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 64GB 2X32GB

  • 64 GB total capacity from a matched 2 × 32 GB kit
  • DDR4-2933 (PC4-23400) speed runs at the rated frequency
  • ECC error correction detects and fixes single-bit faults on the fly
  • 2 V low-voltage operation keeps power draw and heat low
  • Verified fit for Supermicro X12SAE and X12SCA-F motherboards

Exact-fit DDR4 ECC kit for Supermicro

This 64GB kit delivers two 32GB DDR4-2933 unbuffered ECC UDIMMs built to the memory controller's exact rank, voltage and timing requirements. It targets administrators and builders who need validated, error-correcting memory for those specific Supermicro server boards.

Replaces mismatched or non-ECC modules that cause

The jump is worth it when the system requires 2Rx8 organisation, 1.2V operation and CL21 timing at the rated PC4-23400 speed, and when the board's population rules demand matched pairs. Without ECC, silent data corruption and unexpected reboots remain a risk.

Fits the 288-pin UDIMM slots on the named

The kit frees the installer from guessing rank, voltage or timing compatibility and avoids the mismatch that occurs with RDIMM or SODIMM form factors. Builders must still consult the motherboard manual for approved DIMM population order and maximum supported capacity before installation.

特長

  • 64 GB total capacity from a matched 2 × 32 GB kit
  • DDR4-2933 (PC4-23400) speed runs at the rated frequency
  • ECC error correction detects and fixes single-bit faults on the fly
  • 2 V low-voltage operation keeps power draw and heat low
  • Verified fit for Supermicro X12SAE and X12SCA-F motherboards

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 288-pin DDR4 UDIMM kit fit the DIMM slots on my Supermicro X12SAE motherboard?

Yes, the kit uses the 288-pin DDR4 UDIMM form factor required by the Supermicro X12SAE and X12SCA-F boards, so the modules seat directly into the standard DDR4 DIMM slots.

Do I need to install the two 32 GB modules in a specific slot order on the X12SAE board?

The X12SAE manual defines a DIMM population sequence; follow that order when seating both modules so the memory controller initialises the 64 GB kit at DDR4-2933 with CL21 timings.

The modules have no heat spreader — will they need extra cooling or replacement over time?

ECC UDIMMs at 1.2 V run cool without spreaders; no active cooling or scheduled replacement is needed, and the lifetime warranty covers any module that later develops correctable errors.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。