NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
NEMIX RAM
8GB DDR4 2666 CL19 desktop module runs at 1.2V with 288-pin unbuffered design
This NEMIX RAM stick delivers 8 GB of DDR4 memory at 2666 MT/s with a CL19 latency. It uses the standard 288-pin UDIMM form factor and runs at 1.2 V. The module is unbuffered and non-ECC, making it suitable for typical consumer desktop boards.
Operating at 1.20 V means the module draws little power and generates minimal heat during normal workloads. With no heat spreader or onboard LEDs, the bare PCB relies on case airflow, which is usually sufficient for JEDEC-speed memory. There are no moving parts, so the module adds no audible noise to the system.
The 1Rx8 organisation fits into any standard DDR4 DIMM socket without requiring special chipset features. Because it occupies only one slot, remaining sockets stay open for future capacity increases. Compatibility notes reference Dell part numbers SNP5H5PWC/8G and A9845650 as examples of supported platforms.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD21300-818K1 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Align the notch on the module with the key in the 288-pin slot, press down firmly until both side clips click shut, then verify in BIOS that the memory runs at DDR4 2666 CL19.
No routine maintenance is required; keep the gold contacts clean and ensure the motherboard supplies a steady 1.20 V. Replace only if memory errors appear or capacity becomes insufficient.
The CL19 latency at DDR4 2666 sets the throughput ceiling; without a heat spreader the chips rely on case airflow, so thermal throttling can occur before voltage or capacity limits are reached.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?