NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
NEMIX RAM
8GB DDR4 2666 CL19 desktop module runs at 1.2V with 288-pin unbuffered design
This NEMIX RAM stick delivers 8 GB of DDR4 memory at 2666 MT/s with a CL19 latency. It uses the standard 288-pin UDIMM form factor and runs at 1.2 V. The module is unbuffered and non-ECC, making it suitable for typical consumer desktop boards.
Operating at 1.20 V means the module draws little power and generates minimal heat during normal workloads. With no heat spreader or onboard LEDs, the bare PCB relies on case airflow, which is usually sufficient for JEDEC-speed memory. There are no moving parts, so the module adds no audible noise to the system.
The 1Rx8 organisation fits into any standard DDR4 DIMM socket without requiring special chipset features. Because it occupies only one slot, remaining sockets stay open for future capacity increases. Compatibility notes reference Dell part numbers SNP5H5PWC/8G and A9845650 as examples of supported platforms.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD21300-818K1 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Align the notch on the module with the key in the 288-pin slot, press down firmly until both side clips click shut, then verify in BIOS that the memory runs at DDR4 2666 CL19.
No routine maintenance is required; keep the gold contacts clean and ensure the motherboard supplies a steady 1.20 V. Replace only if memory errors appear or capacity becomes insufficient.
The CL19 latency at DDR4 2666 sets the throughput ceiling; without a heat spreader the chips rely on case airflow, so thermal throttling can occur before voltage or capacity limits are reached.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?