NEMIX RAM
NEMIX RAM 8GB DDR4 2666 CL19 desktop RAM
8GB DDR4 2666 CL19 desktop module runs at 1.2V with 288-pin unbuffered design
- Capacity8GB
- Type288-Pin DDR4 UDIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- 8GB capacity adds headroom for multitasking
- DDR4 2666 speed moves data quickly
- CL19 latency keeps response tight
- 2V operation reduces power draw
- 288-pin UDIMM fits standard desktop slots
8 GB DDR4 module for desktop upgrades
This NEMIX RAM stick delivers 8 GB of DDR4 memory at 2666 MT/s with a CL19 latency. It uses the standard 288-pin UDIMM form factor and runs at 1.2 V. The module is unbuffered and non-ECC, making it suitable for typical consumer desktop boards.
Standard voltage keeps thermals low
Operating at 1.20 V means the module draws little power and generates minimal heat during normal workloads. With no heat spreader or onboard LEDs, the bare PCB relies on case airflow, which is usually sufficient for JEDEC-speed memory. There are no moving parts, so the module adds no audible noise to the system.
Single 8 GB stick leaves slots free
The 1Rx8 organisation fits into any standard DDR4 DIMM socket without requiring special chipset features. Because it occupies only one slot, remaining sockets stay open for future capacity increases. Compatibility notes reference Dell part numbers SNP5H5PWC/8G and A9845650 as examples of supported platforms.
Points forts
- 8GB capacity adds headroom for multitasking
- DDR4 2666 speed moves data quickly
- CL19 latency keeps response tight
- 2V operation reduces power draw
- 288-pin UDIMM fits standard desktop slots
Caractéristiques
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD21300-818K1 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Questions sur cet article
How do I install this 288-pin DDR4 UDIMM and what step do people often miss?
Align the notch on the module with the key in the 288-pin slot, press down firmly until both side clips click shut, then verify in BIOS that the memory runs at DDR4 2666 CL19.
What maintenance or replacement will this 8GB DDR4 2666 module need later?
No routine maintenance is required; keep the gold contacts clean and ensure the motherboard supplies a steady 1.20 V. Replace only if memory errors appear or capacity becomes insufficient.
What limit appears first when this CL19 1.20 V module runs under sustained load?
The CL19 latency at DDR4 2666 sets the throughput ceiling; without a heat spreader the chips rely on case airflow, so thermal throttling can occur before voltage or capacity limits are reached.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



