Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Twelve green DDR5 RDIMM modules in a row, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 192GB 12x16GB CL40 1.1V GIGABYTE MZ23-SU0 memory upgrade

SKU CH-GJ25-CC4GW

A 192GB DDR5 4800 ECC registered RDIMM kit with twelve 16GB modules at CL40 and 1.1V, validated for the GIGABYTE MZ23-SU0 motherboard

  • Capacity192GB (12 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 12X16GB

Vedeți celelalte 18 configurații
  • 192 GB total capacity in a 12 x 16 GB kit for maximum server memory density
  • DDR5 4800 MT/s speed with CL40 latency matches the board's rated memory specification
  • Registered ECC design corrects single-bit errors and buffers signals for stable fully-populated operation
  • 1 V operating voltage and 1Rx8 organization meet the motherboard's exact electrical requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the GIGABYTE MZ23-SU0

Capacity and compatibility

This is a 192GB DDR5 registered ECC memory kit built from twelve 16GB modules. It is validated for the GIGABYTE MZ23-SU0 motherboard running at DDR5-4800 with CL40 timings and 1.1V operation.

Who this suits

Server builders who need the exact rank, voltage and timing combination that the MZ23-SU0 memory controller expects for full-capacity recognition. Buyers who want unbuffered UDIMMs or non-ECC modules should look elsewhere.

Build integration

The 288-pin RDIMM form factor matches the board's registered DIMM slots, so every slot can be populated without signal-loading limits. ECC correction and registered buffering free the memory controller for stable operation at the rated 4800 MT/s speed.

Puncte forte

  • 192 GB total capacity in a 12 x 16 GB kit for maximum server memory density
  • DDR5 4800 MT/s speed with CL40 latency matches the board's rated memory specification
  • Registered ECC design corrects single-bit errors and buffers signals for stable fully-populated operation
  • 1 V operating voltage and 1Rx8 organization meet the motherboard's exact electrical requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the GIGABYTE MZ23-SU0

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K12
Capacity192GB (12 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 12X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the GIGABYTE MZ23-SU0 motherboard require 12 DIMM slots to install this 192GB kit?

Yes, the kit contains 12 modules of 16GB each and uses the 288-pin RDIMM form factor, so the board must provide 12 DDR5 RDIMM slots to accept the full kit.

Can I mix these 1Rx8 Registered ECC modules with existing UDIMM or non-ECC DDR5 memory in the same server?

No, Registered ECC RDIMMs cannot be mixed with unbuffered UDIMMs or non-ECC modules; the memory controller requires identical registered ECC DIMMs across all populated channels.

How do I confirm the kit is running at DDR5-4800 CL40 1.1V after installation?

Enter the BIOS or use a hardware-information tool to verify the memory frequency reads 4800 MT/s, CAS latency shows CL40, and the voltage is set to 1.1V for all 12 modules.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.