Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Twelve green DDR5 RDIMM modules in a row, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 192GB 12x16GB CL40 1.1V GIGABYTE MZ23-SU0 memory upgrade

SKU CH-GJ25-CC4GW

A 192GB DDR5 4800 ECC registered RDIMM kit with twelve 16GB modules at CL40 and 1.1V, validated for the GIGABYTE MZ23-SU0 motherboard

  • Capacity192GB (12 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 12X16GB

Pokaż jeszcze 18 konfiguracji
  • 192 GB total capacity in a 12 x 16 GB kit for maximum server memory density
  • DDR5 4800 MT/s speed with CL40 latency matches the board's rated memory specification
  • Registered ECC design corrects single-bit errors and buffers signals for stable fully-populated operation
  • 1 V operating voltage and 1Rx8 organization meet the motherboard's exact electrical requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the GIGABYTE MZ23-SU0

Capacity and compatibility

This is a 192GB DDR5 registered ECC memory kit built from twelve 16GB modules. It is validated for the GIGABYTE MZ23-SU0 motherboard running at DDR5-4800 with CL40 timings and 1.1V operation.

Who this suits

Server builders who need the exact rank, voltage and timing combination that the MZ23-SU0 memory controller expects for full-capacity recognition. Buyers who want unbuffered UDIMMs or non-ECC modules should look elsewhere.

Build integration

The 288-pin RDIMM form factor matches the board's registered DIMM slots, so every slot can be populated without signal-loading limits. ECC correction and registered buffering free the memory controller for stable operation at the rated 4800 MT/s speed.

Najważniejsze cechy

  • 192 GB total capacity in a 12 x 16 GB kit for maximum server memory density
  • DDR5 4800 MT/s speed with CL40 latency matches the board's rated memory specification
  • Registered ECC design corrects single-bit errors and buffers signals for stable fully-populated operation
  • 1 V operating voltage and 1Rx8 organization meet the motherboard's exact electrical requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the GIGABYTE MZ23-SU0

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K12
Capacity192GB (12 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 12X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Does the GIGABYTE MZ23-SU0 motherboard require 12 DIMM slots to install this 192GB kit?

Yes, the kit contains 12 modules of 16GB each and uses the 288-pin RDIMM form factor, so the board must provide 12 DDR5 RDIMM slots to accept the full kit.

Can I mix these 1Rx8 Registered ECC modules with existing UDIMM or non-ECC DDR5 memory in the same server?

No, Registered ECC RDIMMs cannot be mixed with unbuffered UDIMMs or non-ECC modules; the memory controller requires identical registered ECC DIMMs across all populated channels.

How do I confirm the kit is running at DDR5-4800 CL40 1.1V after installation?

Enter the BIOS or use a hardware-information tool to verify the memory frequency reads 4800 MT/s, CAS latency shows CL40, and the voltage is set to 1.1V for all 12 modules.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.