Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 192GB (2x96GB) CL40 1.1V 2Rx4 288-pin memory upgrade

SKU CH-FF4J-TZWTP

A 192GB DDR5 kit of two 96GB registered ECC RDIMMs running at 4800MHz with CL40 latency and 1.1V operation for GIGABYTE MZ73-LM1 servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Vedeți celelalte 18 configurații
  • Massive 192GB capacity with two 96GB modules for memory-intensive server workloads
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data processing
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1V balances responsive timing with efficient power draw
  • Verified 288-pin RDIMM fitment for GIGABYTE MZ73-LM1 motherboard memory population rules

192GB DDR5 4800 ECC RDIMM Kit

This kit supplies 192GB across two 96GB DDR5 4800 RDIMMs. Registered ECC operation at 1.1V and CL40 matches the GIGABYTE MZ73-LM1 memory controller requirements. The 2Rx4 rank layout lets the board run fully populated at rated speed. Modules use major OEM Samsung, Micron or Hynix chips without a heat spreader.

Suited For Registered DDR5 Servers Only

This memory fits servers that require DDR5 288-pin RDIMMs with registered ECC at 1.1V. It will not work in systems needing unbuffered UDIMMs, SODIMMs or any earlier DDR generation. Buyers whose platforms cannot accept 96GB dual-rank modules or registered buffers should choose a different kit.

96GB Per Module Decides Fit

Each DIMM delivers 96GB in a 2Rx4 organisation, the density the motherboard's population rules expect for full-capacity operation. If the manual lists a lower per-slot limit or a different rank configuration, the kit will not be recognised at 192GB. Verify the supported module size before purchase.

Puncte forte

  • Massive 192GB capacity with two 96GB modules for memory-intensive server workloads
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data processing
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1V balances responsive timing with efficient power draw
  • Verified 288-pin RDIMM fitment for GIGABYTE MZ73-LM1 motherboard memory population rules

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 288-pin RDIMM modules fit the GIGABYTE MZ73-LM1 motherboard slots?

Yes, the kit uses the 288-pin Registered DIMM form factor that the MZ73-LM1 requires; it is not a UDIMM or SODIMM.

What is the correct population order when installing both 96GB modules?

Consult the MZ73-LM1 manual for the approved DIMM population sequence; the board's memory-controller rules dictate which slots must be filled first.

Do these Registered ECC modules need any firmware updates or periodic reconfiguration?

No firmware updates are required; the modules run at 1.1 V, CL40, DDR5-4800 once seated, and ECC operates automatically without user intervention.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.