Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 192GB (2x96GB) CL40 1.1V 2Rx4 288-pin memory upgrade

SKU CH-FF4J-TZWTP

A 192GB DDR5 kit of two 96GB registered ECC RDIMMs running at 4800MHz with CL40 latency and 1.1V operation for GIGABYTE MZ73-LM1 servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Voir les 18 autres configurations
  • Massive 192GB capacity with two 96GB modules for memory-intensive server workloads
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data processing
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1V balances responsive timing with efficient power draw
  • Verified 288-pin RDIMM fitment for GIGABYTE MZ73-LM1 motherboard memory population rules

192GB DDR5 4800 ECC RDIMM Kit

This kit supplies 192GB across two 96GB DDR5 4800 RDIMMs. Registered ECC operation at 1.1V and CL40 matches the GIGABYTE MZ73-LM1 memory controller requirements. The 2Rx4 rank layout lets the board run fully populated at rated speed. Modules use major OEM Samsung, Micron or Hynix chips without a heat spreader.

Suited For Registered DDR5 Servers Only

This memory fits servers that require DDR5 288-pin RDIMMs with registered ECC at 1.1V. It will not work in systems needing unbuffered UDIMMs, SODIMMs or any earlier DDR generation. Buyers whose platforms cannot accept 96GB dual-rank modules or registered buffers should choose a different kit.

96GB Per Module Decides Fit

Each DIMM delivers 96GB in a 2Rx4 organisation, the density the motherboard's population rules expect for full-capacity operation. If the manual lists a lower per-slot limit or a different rank configuration, the kit will not be recognised at 192GB. Verify the supported module size before purchase.

Points forts

  • Massive 192GB capacity with two 96GB modules for memory-intensive server workloads
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data processing
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1V balances responsive timing with efficient power draw
  • Verified 288-pin RDIMM fitment for GIGABYTE MZ73-LM1 motherboard memory population rules

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will the 288-pin RDIMM modules fit the GIGABYTE MZ73-LM1 motherboard slots?

Yes, the kit uses the 288-pin Registered DIMM form factor that the MZ73-LM1 requires; it is not a UDIMM or SODIMM.

What is the correct population order when installing both 96GB modules?

Consult the MZ73-LM1 manual for the approved DIMM population sequence; the board's memory-controller rules dictate which slots must be filled first.

Do these Registered ECC modules need any firmware updates or periodic reconfiguration?

No firmware updates are required; the modules run at 1.1 V, CL40, DDR5-4800 once seated, and ECC operates automatically without user intervention.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.