Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black cylindrical G1/4 extender fitting, 22 mm diameter, 15 mm high, female to male thread

Thermaltake

Thermaltake CL-W045-CU00BL-A 10mm extender fitting diy cooling

SKU CH-DMH7-Y8GRH MPN CL-W045-CU00BL-A

G 1/4 female-to-male extender adds 10 mm spacing for custom loops, black chrome-plated brass with pre-installed O-ring, 27 g

  • TypeFittings
  • FeaturesDimension: ?22 x 15 (H) (mm) Applicable: G 1/4 Weight: 27 g
  • G1/4 thread ensures broad loop compatibility
  • Female-to-male design adds 10 mm clearance for tight builds
  • Black chrome-plated brass resists corrosion and looks clean
  • Pre-installed O-ring delivers high-flow leak-free sealing
  • Lightweight 27 g brass construction minimises stress on tubing

Thermaltake Pacific 10mm Extender Fitting

The Thermaltake Pacific CL-W045-CU00BL-A is a G 1/4 female-to-male extender fitting built for custom liquid-cooling loops. It adds 10 millimetres of spacing between components without restricting flow. The black chrome-plated brass body suits builders who need precise tube routing in tight layouts.

10mm Offset With High-Flow Path

The fitting provides a straight 10 millimetre extension while maintaining a high-flow, leak-free channel. Its internal bore matches standard G 1/4 threads so coolant moves freely. The 22 by 15 millimetre profile fits most block and radiator ports. It cannot bridge larger gaps or replace angled adapters.

Brass Construction With Pre-Installed Seal

The copper-alloy body weighs 27 grams and resists corrosion under normal loop temperatures. A pre-installed O-ring seals the G 1/4 interface without extra tape or paste. The rigid metal construction adds negligible thermal load and produces no noise. It draws zero power.

Puncte forte

  • G1/4 thread ensures broad loop compatibility
  • Female-to-male design adds 10 mm clearance for tight builds
  • Black chrome-plated brass resists corrosion and looks clean
  • Pre-installed O-ring delivers high-flow leak-free sealing
  • Lightweight 27 g brass construction minimises stress on tubing

Specificații

BrandThermaltake
SeriesPacific
ModelCL-W045-CU00BL-A
TypeFittings
FeaturesDimension: ?22 x 15 (H) (mm)
Applicable: G 1/4
Weight: 27 g
Material: CU
Screw Thread: G 1/4
Note: Female to Male
Greutate la expediere0.02 kg
Dimensiunile coletului74 × 46 × 25 mm

Întrebări despre acest articol

Will the G 1/4 threads on this extender fit the fittings already on my older radiator and blocks?

Yes — both ends use standard G 1/4 threads, so they mate with any component that follows the same thread spec.

How can I confirm the extender is seated correctly and not leaking after I install it?

Tighten each side by hand until the pre-installed O-ring compresses, then run a leak test with the pump only; no drops at the joints means it is sealed.

Does the package include any tubing, clamps or extra O-rings, or is it just the single extender?

The box contains the black chrome-plated brass extender fitting only; tubing, clamps and spare O-rings must be purchased separately.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.