Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black cylindrical G1/4 extender fitting, 22 mm diameter, 15 mm high, female to male thread

Thermaltake

Thermaltake CL-W045-CU00BL-A 10mm extender fitting diy cooling

SKU CH-DMH7-Y8GRH MPN CL-W045-CU00BL-A

G 1/4 female-to-male extender adds 10 mm spacing for custom loops, black chrome-plated brass with pre-installed O-ring, 27 g

  • TypeFittings
  • FeaturesDimension: ?22 x 15 (H) (mm) Applicable: G 1/4 Weight: 27 g
  • G1/4 thread ensures broad loop compatibility
  • Female-to-male design adds 10 mm clearance for tight builds
  • Black chrome-plated brass resists corrosion and looks clean
  • Pre-installed O-ring delivers high-flow leak-free sealing
  • Lightweight 27 g brass construction minimises stress on tubing

Thermaltake Pacific 10mm Extender Fitting

The Thermaltake Pacific CL-W045-CU00BL-A is a G 1/4 female-to-male extender fitting built for custom liquid-cooling loops. It adds 10 millimetres of spacing between components without restricting flow. The black chrome-plated brass body suits builders who need precise tube routing in tight layouts.

10mm Offset With High-Flow Path

The fitting provides a straight 10 millimetre extension while maintaining a high-flow, leak-free channel. Its internal bore matches standard G 1/4 threads so coolant moves freely. The 22 by 15 millimetre profile fits most block and radiator ports. It cannot bridge larger gaps or replace angled adapters.

Brass Construction With Pre-Installed Seal

The copper-alloy body weighs 27 grams and resists corrosion under normal loop temperatures. A pre-installed O-ring seals the G 1/4 interface without extra tape or paste. The rigid metal construction adds negligible thermal load and produces no noise. It draws zero power.

Pontos fortes

  • G1/4 thread ensures broad loop compatibility
  • Female-to-male design adds 10 mm clearance for tight builds
  • Black chrome-plated brass resists corrosion and looks clean
  • Pre-installed O-ring delivers high-flow leak-free sealing
  • Lightweight 27 g brass construction minimises stress on tubing

Especificações

BrandThermaltake
SeriesPacific
ModelCL-W045-CU00BL-A
TypeFittings
FeaturesDimension: ?22 x 15 (H) (mm)
Applicable: G 1/4
Weight: 27 g
Material: CU
Screw Thread: G 1/4
Note: Female to Male
Peso de envio0.02 kg
Dimensões da embalagem74 × 46 × 25 mm

Perguntas sobre este artigo

Will the G 1/4 threads on this extender fit the fittings already on my older radiator and blocks?

Yes — both ends use standard G 1/4 threads, so they mate with any component that follows the same thread spec.

How can I confirm the extender is seated correctly and not leaking after I install it?

Tighten each side by hand until the pre-installed O-ring compresses, then run a leak test with the pump only; no drops at the joints means it is sealed.

Does the package include any tubing, clamps or extra O-rings, or is it just the single extender?

The box contains the black chrome-plated brass extender fitting only; tubing, clamps and spare O-rings must be purchased separately.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.