저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black cylindrical G1/4 extender fitting, 22 mm diameter, 15 mm high, female to male thread

Thermaltake

Thermaltake CL-W045-CU00BL-A 10mm extender fitting diy cooling

SKU CH-DMH7-Y8GRH MPN CL-W045-CU00BL-A

G 1/4 female-to-male extender adds 10 mm spacing for custom loops, black chrome-plated brass with pre-installed O-ring, 27 g

  • TypeFittings
  • FeaturesDimension: ?22 x 15 (H) (mm) Applicable: G 1/4 Weight: 27 g
  • G1/4 thread ensures broad loop compatibility
  • Female-to-male design adds 10 mm clearance for tight builds
  • Black chrome-plated brass resists corrosion and looks clean
  • Pre-installed O-ring delivers high-flow leak-free sealing
  • Lightweight 27 g brass construction minimises stress on tubing

Thermaltake Pacific 10mm Extender Fitting

The Thermaltake Pacific CL-W045-CU00BL-A is a G 1/4 female-to-male extender fitting built for custom liquid-cooling loops. It adds 10 millimetres of spacing between components without restricting flow. The black chrome-plated brass body suits builders who need precise tube routing in tight layouts.

10mm Offset With High-Flow Path

The fitting provides a straight 10 millimetre extension while maintaining a high-flow, leak-free channel. Its internal bore matches standard G 1/4 threads so coolant moves freely. The 22 by 15 millimetre profile fits most block and radiator ports. It cannot bridge larger gaps or replace angled adapters.

Brass Construction With Pre-Installed Seal

The copper-alloy body weighs 27 grams and resists corrosion under normal loop temperatures. A pre-installed O-ring seals the G 1/4 interface without extra tape or paste. The rigid metal construction adds negligible thermal load and produces no noise. It draws zero power.

주요 특징

  • G1/4 thread ensures broad loop compatibility
  • Female-to-male design adds 10 mm clearance for tight builds
  • Black chrome-plated brass resists corrosion and looks clean
  • Pre-installed O-ring delivers high-flow leak-free sealing
  • Lightweight 27 g brass construction minimises stress on tubing

사양

BrandThermaltake
SeriesPacific
ModelCL-W045-CU00BL-A
TypeFittings
FeaturesDimension: ?22 x 15 (H) (mm)
Applicable: G 1/4
Weight: 27 g
Material: CU
Screw Thread: G 1/4
Note: Female to Male
배송 무게0.02 kg
포장 크기74 × 46 × 25 mm

이 상품에 대한 질문

Will the G 1/4 threads on this extender fit the fittings already on my older radiator and blocks?

Yes — both ends use standard G 1/4 threads, so they mate with any component that follows the same thread spec.

How can I confirm the extender is seated correctly and not leaking after I install it?

Tighten each side by hand until the pre-installed O-ring compresses, then run a leak test with the pump only; no drops at the joints means it is sealed.

Does the package include any tubing, clamps or extra O-rings, or is it just the single extender?

The box contains the black chrome-plated brass extender fitting only; tubing, clamps and spare O-rings must be purchased separately.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.