نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black cylindrical G1/4 extender fitting, 22 mm diameter, 15 mm high, female to male thread

Thermaltake

Thermaltake CL-W045-CU00BL-A 10mm extender fitting diy cooling

SKU CH-DMH7-Y8GRH MPN CL-W045-CU00BL-A

G 1/4 female-to-male extender adds 10 mm spacing for custom loops, black chrome-plated brass with pre-installed O-ring, 27 g

  • TypeFittings
  • FeaturesDimension: ?22 x 15 (H) (mm) Applicable: G 1/4 Weight: 27 g
  • G1/4 thread ensures broad loop compatibility
  • Female-to-male design adds 10 mm clearance for tight builds
  • Black chrome-plated brass resists corrosion and looks clean
  • Pre-installed O-ring delivers high-flow leak-free sealing
  • Lightweight 27 g brass construction minimises stress on tubing

Thermaltake Pacific 10mm Extender Fitting

The Thermaltake Pacific CL-W045-CU00BL-A is a G 1/4 female-to-male extender fitting built for custom liquid-cooling loops. It adds 10 millimetres of spacing between components without restricting flow. The black chrome-plated brass body suits builders who need precise tube routing in tight layouts.

10mm Offset With High-Flow Path

The fitting provides a straight 10 millimetre extension while maintaining a high-flow, leak-free channel. Its internal bore matches standard G 1/4 threads so coolant moves freely. The 22 by 15 millimetre profile fits most block and radiator ports. It cannot bridge larger gaps or replace angled adapters.

Brass Construction With Pre-Installed Seal

The copper-alloy body weighs 27 grams and resists corrosion under normal loop temperatures. A pre-installed O-ring seals the G 1/4 interface without extra tape or paste. The rigid metal construction adds negligible thermal load and produces no noise. It draws zero power.

أبرز المميزات

  • G1/4 thread ensures broad loop compatibility
  • Female-to-male design adds 10 mm clearance for tight builds
  • Black chrome-plated brass resists corrosion and looks clean
  • Pre-installed O-ring delivers high-flow leak-free sealing
  • Lightweight 27 g brass construction minimises stress on tubing

المواصفات

BrandThermaltake
SeriesPacific
ModelCL-W045-CU00BL-A
TypeFittings
FeaturesDimension: ?22 x 15 (H) (mm)
Applicable: G 1/4
Weight: 27 g
Material: CU
Screw Thread: G 1/4
Note: Female to Male
وزن الشحنة0.02 kg
أبعاد الطرد74 × 46 × 25 mm

أسئلة حول هذا المنتج

Will the G 1/4 threads on this extender fit the fittings already on my older radiator and blocks?

Yes — both ends use standard G 1/4 threads, so they mate with any component that follows the same thread spec.

How can I confirm the extender is seated correctly and not leaking after I install it?

Tighten each side by hand until the pre-installed O-ring compresses, then run a leak test with the pump only; no drops at the joints means it is sealed.

Does the package include any tubing, clamps or extra O-rings, or is it just the single extender?

The box contains the black chrome-plated brass extender fitting only; tubing, clamps and spare O-rings must be purchased separately.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.