Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular metal mining unit with dual fans and Ethernet port

AFRNDK

AFRNDK Innosilicon T3+ Pro 67TH/s 3300W SHA-256 ASIC mining hardware

SKU CH-ZGD4-59HTY

SHA-256 ASIC miner delivering 67 TH/s at 3300 W with dual-fan cooling in a 338×207×293 mm chassis

  • 67 TH/s SHA-256 hash rate for Bitcoin mining
  • 3300 W power draw at 210–240 V AC
  • 75 dB noise level with dual-fan cooling
  • 5 kg compact chassis measuring 338×207×293 mm
  • Operates from 0–40 °C and 5–95 % humidity

AFRNDK Innosilicon T3+ Pro 67TH/s Miner

This AFRNDK Innosilicon T3+ Pro delivers a 67TH/s hash rate for SHA-256 Bitcoin mining at 3300W power draw. It targets farm operators who need high-density ASIC performance with factory-tested reliability and a certified 137 percent profit ratio. The unit uses a dual-fan cooling system within a 338x207x293mm chassis weighing 13.5Kgs.

Pre-Installation Requirements

Verify your facility provides 210~240V AC with a 16A dedicated circuit and a compatible 16A AC cable for the power supply input. Ensure ambient humidity stays below 75 percent and dust levels remain under 0.5 Mg/m3, while the operating temperature range is 0°C to 40°C. The Ethernet interface requires a wired network connection for pool communication and management tool access.

Sustained-Load Behaviour

Under continuous operation the dual fans maintain airflow to manage the 3300W thermal load, producing a consistent 75db noise level. The fault-tolerant cooling design supports 24/7 hashing at the rated 67TH/s across the full 5% to 95% humidity envelope. Factory burn-in testing confirms stability before shipment, reducing early-life failure risk during extended mining cycles.

Prednosti

  • 67 TH/s SHA-256 hash rate for Bitcoin mining
  • 3300 W power draw at 210–240 V AC
  • 75 dB noise level with dual-fan cooling
  • 5 kg compact chassis measuring 338×207×293 mm
  • Operates from 0–40 °C and 5–95 % humidity

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

What power supply capacity and AC cable rating are required to run this miner safely?

The unit draws 3300 W and needs a 16 A AC cable on a 210–240 V supply; ensure your PDU and wiring can sustain that continuous load.

Will the noise level and physical size fit a typical home or office environment?

At 75 dB and 338 × 207 × 293 mm the miner is loud and bulky, so it is suited to a dedicated rack or farm room rather than a living space.

What environmental conditions must the site meet for reliable operation?

Operate between 0 °C and 40 °C with humidity below 75 %, keep dust under 0.5 mg/m³, and use a dust filter on the dual-fan intake.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.