Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular metal mining unit with dual fans and Ethernet port

AFRNDK

AFRNDK Innosilicon T3+ Pro 67TH/s 3300W SHA-256 ASIC mining hardware

SKU CH-ZGD4-59HTY

SHA-256 ASIC miner delivering 67 TH/s at 3300 W with dual-fan cooling in a 338×207×293 mm chassis

  • 67 TH/s SHA-256 hash rate for Bitcoin mining
  • 3300 W power draw at 210–240 V AC
  • 75 dB noise level with dual-fan cooling
  • 5 kg compact chassis measuring 338×207×293 mm
  • Operates from 0–40 °C and 5–95 % humidity

AFRNDK Innosilicon T3+ Pro 67TH/s Miner

This AFRNDK Innosilicon T3+ Pro delivers a 67TH/s hash rate for SHA-256 Bitcoin mining at 3300W power draw. It targets farm operators who need high-density ASIC performance with factory-tested reliability and a certified 137 percent profit ratio. The unit uses a dual-fan cooling system within a 338x207x293mm chassis weighing 13.5Kgs.

Pre-Installation Requirements

Verify your facility provides 210~240V AC with a 16A dedicated circuit and a compatible 16A AC cable for the power supply input. Ensure ambient humidity stays below 75 percent and dust levels remain under 0.5 Mg/m3, while the operating temperature range is 0°C to 40°C. The Ethernet interface requires a wired network connection for pool communication and management tool access.

Sustained-Load Behaviour

Under continuous operation the dual fans maintain airflow to manage the 3300W thermal load, producing a consistent 75db noise level. The fault-tolerant cooling design supports 24/7 hashing at the rated 67TH/s across the full 5% to 95% humidity envelope. Factory burn-in testing confirms stability before shipment, reducing early-life failure risk during extended mining cycles.

Pluspunten

  • 67 TH/s SHA-256 hash rate for Bitcoin mining
  • 3300 W power draw at 210–240 V AC
  • 75 dB noise level with dual-fan cooling
  • 5 kg compact chassis measuring 338×207×293 mm
  • Operates from 0–40 °C and 5–95 % humidity

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

What power supply capacity and AC cable rating are required to run this miner safely?

The unit draws 3300 W and needs a 16 A AC cable on a 210–240 V supply; ensure your PDU and wiring can sustain that continuous load.

Will the noise level and physical size fit a typical home or office environment?

At 75 dB and 338 × 207 × 293 mm the miner is loud and bulky, so it is suited to a dedicated rack or farm room rather than a living space.

What environmental conditions must the site meet for reliable operation?

Operate between 0 °C and 40 °C with humidity below 75 %, keep dust under 0.5 mg/m³, and use a dust filter on the dual-fan intake.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.