Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular metal mining unit with dual fans and Ethernet port

AFRNDK

AFRNDK Innosilicon T3+ Pro 67TH/s 3300W SHA-256 ASIC mining hardware

SKU CH-ZGD4-59HTY

SHA-256 ASIC miner delivering 67 TH/s at 3300 W with dual-fan cooling in a 338×207×293 mm chassis

  • 67 TH/s SHA-256 hash rate for Bitcoin mining
  • 3300 W power draw at 210–240 V AC
  • 75 dB noise level with dual-fan cooling
  • 5 kg compact chassis measuring 338×207×293 mm
  • Operates from 0–40 °C and 5–95 % humidity

AFRNDK Innosilicon T3+ Pro 67TH/s Miner

This AFRNDK Innosilicon T3+ Pro delivers a 67TH/s hash rate for SHA-256 Bitcoin mining at 3300W power draw. It targets farm operators who need high-density ASIC performance with factory-tested reliability and a certified 137 percent profit ratio. The unit uses a dual-fan cooling system within a 338x207x293mm chassis weighing 13.5Kgs.

Pre-Installation Requirements

Verify your facility provides 210~240V AC with a 16A dedicated circuit and a compatible 16A AC cable for the power supply input. Ensure ambient humidity stays below 75 percent and dust levels remain under 0.5 Mg/m3, while the operating temperature range is 0°C to 40°C. The Ethernet interface requires a wired network connection for pool communication and management tool access.

Sustained-Load Behaviour

Under continuous operation the dual fans maintain airflow to manage the 3300W thermal load, producing a consistent 75db noise level. The fault-tolerant cooling design supports 24/7 hashing at the rated 67TH/s across the full 5% to 95% humidity envelope. Factory burn-in testing confirms stability before shipment, reducing early-life failure risk during extended mining cycles.

Přednosti

  • 67 TH/s SHA-256 hash rate for Bitcoin mining
  • 3300 W power draw at 210–240 V AC
  • 75 dB noise level with dual-fan cooling
  • 5 kg compact chassis measuring 338×207×293 mm
  • Operates from 0–40 °C and 5–95 % humidity

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

What power supply capacity and AC cable rating are required to run this miner safely?

The unit draws 3300 W and needs a 16 A AC cable on a 210–240 V supply; ensure your PDU and wiring can sustain that continuous load.

Will the noise level and physical size fit a typical home or office environment?

At 75 dB and 338 × 207 × 293 mm the miner is loud and bulky, so it is suited to a dedicated rack or farm room rather than a living space.

What environmental conditions must the site meet for reliable operation?

Operate between 0 °C and 40 °C with humidity below 75 %, keep dust under 0.5 mg/m³, and use a dust filter on the dual-fan intake.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.