Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular silver metal power supply unit with fan grille and label sticker

HP

HP 702307-002 PS-4241-1HC power supply for EliteDesk 800 G1 SFF and ProDesk 400 G1

SKU CH-DWPT-NMNCX

Replacement 400 W unit for EliteDesk 800 G1 SFF and ProDesk 400 G1 systems

  • OEM HP power supply fits EliteDesk 800 G1 SFF
  • Direct replacement for ProDesk 400 G1 systems
  • Part number 702307-002 ensures exact compatibility
  • New condition ready for immediate installation

HP 702307-002 PS-4241-1HC for EliteDesk 800 G1 SFF

This OEM power supply replaces the original unit in HP EliteDesk 800 G1 SFF and ProDesk 400 G1 systems. It fits the proprietary form factor and connector layout used by those models. Buyers needing a standard ATX pinout or higher wattage for discrete graphics upgrades cannot use this part.

Thermals noise and power draw in normal use

The supply delivers the rated output for the factory configuration of the supported desktops. Fan speed is managed by the system BIOS under typical office workloads. No independent efficiency certification or acoustic rating is provided for this unit.

Prednosti

  • OEM HP power supply fits EliteDesk 800 G1 SFF
  • Direct replacement for ProDesk 400 G1 systems
  • Part number 702307-002 ensures exact compatibility
  • New condition ready for immediate installation

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How do I install the PS-4241-1HC power supply in my EliteDesk 800 G1 SFF and which step is often missed?

Remove the side panel, unplug the 24-pin and 4-pin cables from the old unit, unscrew the four retaining screws, slide the new PS-4241-1HC into the chassis, refit the screws, reconnect both power cables, and ensure the 4-pin CPU connector is fully seated — it is the step most often left loose.

What maintenance or replacement will the PS-4241-1HC need over time?

The internal fan bearings will eventually wear; plan to replace the entire PS-4241-1HC unit when fan noise increases or voltages drift, as no user-serviceable parts are inside.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.