Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3 Pack White
- 3 Fans
- Case Fan
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Jungle Leopard
Three 120 mm PWM fans with hydraulic bearings, 5 V ARGB lighting and daisy-chain cabling deliver 62.36 CFM at 29 dBA
Color Black Forward
This pack contains three 120 mm case fans with hydraulic bearings and addressable RGB lighting. Each unit spins up to 2000 RPM while producing 62.36 CFM of airflow and 2.21 mmAq of static pressure. The 4-pin PWM connector allows the motherboard to vary speed between 800 and 2000 RPM based on temperature. Noise is rated at 29 dBA at full speed.
The slide-in pin-to-pin mechanism links fans together so only one cable runs from the cluster to the motherboard. This reduces internal wiring clutter and shortens installation time compared with routing separate leads for every fan. Eight rubber damping pads on each frame absorb vibration to keep the 29 dBA figure consistent in practice. The 5 V 3-pin ARGB header synchronises 16 million colours across supported motherboards.
At 25 mm thick the fans fit typical 120 mm mounting points but will not suit slim chassis that require thinner profiles. The 5 V ARGB header must be present on the motherboard; older 12 V 4-pin RGB connectors cannot drive the lighting. PWM control needs a 4-pin fan header; 3-pin voltage control will not enable the 800 to 2000 RPM range. Hydraulic bearings tolerate horizontal or vertical orientation but are not rated for liquid-cooling radiators.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The hydraulic bearing is rated for long service life; routine dust removal from the blades and frame every few months keeps airflow at 62.36 CFM and noise at 29 dBA.
PWM control caps speed at 2000 RPM; sustained loads stay within the 2.21 mmAq pressure rating while the 4-pin connector regulates voltage and current.
Each fan runs at 29 dBA; three fans together add minimal case heat because the PWM curve drops speed to 800 RPM when temperatures allow.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?