Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green bare circuit board DDR5 RDIMM with black memory chips and gold edge connector

Kingston Technology Corp.

Kingston Technology Corp. KSM56R46BD4PMI-96HMI 96GB DDR5-5600 CL46 ECC Registered 2Rx4 288-pin DIMM server RAM

SKU CH-RXNH-NW89F MPN KSM56R46BD4PMI-96HMI

A 96 GB DDR5-5600 registered ECC DIMM with CL46 latency, 2Rx4 organisation and 1.10 V operation for high-capacity server workloads

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Timing46-45-45
  • Voltage1.10V

Capacity 96GB

Rank 2Rx4

Option Hynix, Full Lock

  • 96 GB capacity handles heavy workloads smoothly
  • DDR5 5600 speed moves data fast for productivity
  • ECC registered design protects data integrity reliably
  • CL46 46-45-45 timing balances latency and stability
  • 10 V operation reduces power draw efficiently

96GB DDR5-5600 ECC Registered DIMM

This Kingston module delivers 96GB of DDR5-5600 memory with CL46 latency and a registered signal. It operates at 1.10V using a 288-pin RDIMM form factor and Hynix M-Die components. The unit is new and built for server platforms that require error-correcting code.

Suited for high-density server builds.

The registered design and ECC function target multi-socket servers and workstations that support RDIMMs. Systems without registered memory support or ECC capability cannot use this module. Desktop boards and consumer laptops will not accept it.

2Rx4 organisation at 5600 MT/s

The dual-rank 2Rx4 layout provides the density needed for large memory configurations at the rated 5600 MT/s speed. Verify that your motherboard and CPU combination supports 96GB 2Rx4 RDIMMs at this data rate before purchasing.

Prednosti

  • 96 GB capacity handles heavy workloads smoothly
  • DDR5 5600 speed moves data fast for productivity
  • ECC registered design protects data integrity reliably
  • CL46 46-45-45 timing balances latency and stability
  • 10 V operation reduces power draw efficiently

Špecifikácie

BrandKingston
ModelKSM56R46BD4PMI-96HMI
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Timing46-45-45
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetHynix M-Die
Heat SpreaderNo
FeaturesKingston's KSM56R46BD4PMI-96HMI is a 12G x 80-bit (96GB) DDR5-5600 CL46 SDRAM (Synchronous DRAM), 2Rx4, ECC, memory module, based on forty 6G x 4-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR5-5600 timing of 46-45-45 at 1.1V.
Prepravná hmotnosť0.02 kg
Rozmery balenia146 × 44 × 8 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What motherboard slot and voltage does the 288-pin DDR5 RDIMM require?

The module fits a 288-pin DDR5 RDIMM slot and operates at 1.10 V.

How do you install the registered ECC module, and what step is often missed?

Align the key notch with the slot, press firmly until both retention clips click, then enable ECC and registered mode in the BIOS.

What long-term upkeep does the Hynix M-Die 2Rx4 module need?

No scheduled maintenance is required; if a memory test later flags correctable ECC errors, replace the module.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.