BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
NEMIX RAM
4GB DDR4 2400 CL17 1.2V SODIMM module for QNAP NAS, laptop, AIO or SFF upgrades
This 4 GB DDR4 module runs at 2400 MT/s with CL17 latency and 1.20 V operation. The 260-pin unbuffered non-ECC SO-DIMM fits laptops, all-in-one PCs, small-form-factor systems and compatible NAS devices. It is built for straightforward capacity upgrades in those platforms.
Operating at the standard 1.20 V DDR4 voltage keeps power draw low and heat output minimal during typical workloads. The module has no heat spreader, relying on the system’s existing airflow for cooling. Silent operation is maintained because there are no moving parts on the memory itself.
All modules are rigorously stress tested under load to ensure reliability during extended use. The unbuffered non-ECC design delivers consistent throughput for long-running NAS services, virtual machines or compilation tasks. Stability is validated for continuous operation rather than short bursts alone.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS19200-418K1 |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Power off the NAS, open the memory cover, align the notch on the module with the slot key, press firmly until the side clips click, then replace the cover before powering on.
No scheduled maintenance is required; the module has no heat spreader and runs at 1.20V, so only replace it if a memory test reports errors or you need more capacity.
The 4GB capacity is the first bottleneck; once the NAS uses all available memory it must swap to disk, which slows performance long before thermal or voltage limits are reached.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?