BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
4GB DDR4 2400 CL17 1.2V SODIMM module for QNAP NAS, laptop, AIO or SFF upgrades
This 4 GB DDR4 module runs at 2400 MT/s with CL17 latency and 1.20 V operation. The 260-pin unbuffered non-ECC SO-DIMM fits laptops, all-in-one PCs, small-form-factor systems and compatible NAS devices. It is built for straightforward capacity upgrades in those platforms.
Operating at the standard 1.20 V DDR4 voltage keeps power draw low and heat output minimal during typical workloads. The module has no heat spreader, relying on the system’s existing airflow for cooling. Silent operation is maintained because there are no moving parts on the memory itself.
All modules are rigorously stress tested under load to ensure reliability during extended use. The unbuffered non-ECC design delivers consistent throughput for long-running NAS services, virtual machines or compilation tasks. Stability is validated for continuous operation rather than short bursts alone.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS19200-418K1 |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Power off the NAS, open the memory cover, align the notch on the module with the slot key, press firmly until the side clips click, then replace the cover before powering on.
No scheduled maintenance is required; the module has no heat spreader and runs at 1.20V, so only replace it if a memory test reports errors or you need more capacity.
The 4GB capacity is the first bottleneck; once the NAS uses all available memory it must swap to disk, which slows performance long before thermal or voltage limits are reached.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟