Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 6400 288GB (6x48GB) ECC RDIMM CL52 1.1V Supermicro H13SST-G memory upgrade

SKU CH-8A98-FJKDB

A 288 GB DDR5 ECC RDIMM kit of six 48 GB modules running at 6400 MT/s with CL52 latency and 1.1 V operation, registered for full-capacity stability on Supermicro H13SST-G motherboards

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 288 GB total capacity from six 48 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation matches the Supermicro H13SST-G memory controller specification
  • 288-pin RDIMM form factor fits the board's required slot type

Supermicro H13SST-G DDR5 RDIMM Kit

This 288GB kit contains six 48GB DDR5 6400 RDIMM modules built for the Supermicro H13SST-G motherboard. It delivers registered ECC memory that the board recognises at full capacity and rated speed.

Registered ECC Design and 288-Pin Form Factor

Registered architecture reduces electrical load on the memory controller so all slots run fully populated, while ECC corrects single-bit errors to prevent silent data corruption. The 288-pin RDIMM form factor matches the board's required slot type exactly.

Verify DIMM Population Rules Before Ordering

Server memory support varies by model and BIOS revision. Consult the motherboard manual for supported capacities, approved population order and installation steps to ensure compatibility with your specific configuration.

Prednosti

  • 288 GB total capacity from six 48 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation matches the Supermicro H13SST-G memory controller specification
  • 288-pin RDIMM form factor fits the board's required slot type

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Otázky k tomuto produktu

Does the DDR5-6400 PC5-51200 rating run at full speed on the Supermicro H13SST-G?

Yes, the kit is spec-matched to the board so the memory controller recognises the 2Rx8 registered ECC modules at their rated 6400 MT/s and CL52 latency without down-clocking.

Will these 288-pin RDIMMs physically fit the H13SST-G DIMM slots?

The motherboard requires 288-pin registered RDIMMs; this 6-module kit uses that exact form factor and is verified for the H13SST-G slot layout.

What population order should I follow when installing all six modules?

Consult the Supermicro H13SST-G manual for the approved DIMM population sequence; the board's rules dictate which slots to fill first for full 288 GB operation.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.