BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00276899BTC
現貨
NEMIX RAM
NEMIX RAM DDR5 6400 288GB (6x48GB) ECC RDIMM CL52 1.1V Supermicro H13SST-G memory upgrade
A 288 GB DDR5 ECC RDIMM kit of six 48 GB modules running at 6400 MT/s with CL52 latency and 1.1 V operation, registered for full-capacity stability on Supermicro H13SST-G motherboards
- Capacity288GB (6 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 288 GB total capacity from six 48 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- Registered ECC design offloads the controller and corrects single-bit errors
- 1 V operation matches the Supermicro H13SST-G memory controller specification
- 288-pin RDIMM form factor fits the board's required slot type
Supermicro H13SST-G DDR5 RDIMM Kit
This 288GB kit contains six 48GB DDR5 6400 RDIMM modules built for the Supermicro H13SST-G motherboard. It delivers registered ECC memory that the board recognises at full capacity and rated speed.
Registered ECC Design and 288-Pin Form Factor
Registered architecture reduces electrical load on the memory controller so all slots run fully populated, while ECC corrects single-bit errors to prevent silent data corruption. The 288-pin RDIMM form factor matches the board's required slot type exactly.
Verify DIMM Population Rules Before Ordering
Server memory support varies by model and BIOS revision. Consult the motherboard manual for supported capacities, approved population order and installation steps to ensure compatibility with your specific configuration.
商品特色
- 288 GB total capacity from six 48 GB modules
- DDR5 6400 speed with CL52 latency for rated throughput
- Registered ECC design offloads the controller and corrects single-bit errors
- 1 V operation matches the Supermicro H13SST-G memory controller specification
- 288-pin RDIMM form factor fits the board's required slot type
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K6 |
| Capacity | 288GB (6 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
商品問答
Does the DDR5-6400 PC5-51200 rating run at full speed on the Supermicro H13SST-G?
Yes, the kit is spec-matched to the board so the memory controller recognises the 2Rx8 registered ECC modules at their rated 6400 MT/s and CL52 latency without down-clocking.
Will these 288-pin RDIMMs physically fit the H13SST-G DIMM slots?
The motherboard requires 288-pin registered RDIMMs; this 6-module kit uses that exact form factor and is verified for the H13SST-G slot layout.
What population order should I follow when installing all six modules?
Consult the Supermicro H13SST-G manual for the approved DIMM population sequence; the board's rules dictate which slots to fill first for full 288 GB operation.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
