Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
OEM Industries
A compact 12 V 0.19 A fan and heatsink with nine blades and a two-pin connector for graphics-card cooling
This 12V 0.19A cooler combines a nine-blade fan with a heatsink for component thermal management. The two-wire power connector delivers fixed-speed operation without pulse-width modulation control. It is intended for builders fitting a compact air-cooling solution onto a graphics card or similar add-in board. The two-tone finish distinguishes the unit visually inside a chassis.
Verify that the target board provides a two-pin 12V header rated for at least 0.19A before ordering. Confirm physical space around the component slot so the heatsink and fan assembly can sit without fouling adjacent slots, capacitors or cable routing. The fixed-speed design means the fan runs continuously whenever the header is powered. No four-pin PWM or three-pin tachometer signal is supported by this connector.
The aluminium heatsink draws heat from the component base while the nine-blade fan moves air across the fins. Two-pin power simplifies wiring but removes speed monitoring and automatic curve control. The 12V 0.19A rating keeps current draw low for standard headers. Daily use brings constant airflow noise at full voltage with no software-adjustable quiet mode.
| Model | MGT5012XB-W10 |
|---|---|
| Color | 2-Tone |
| Type | Fan & Heatsinks |
| Power Connector | 2 Pin |
| LED | No |
The package contains the cooling fan with heatsink, 9-blade impeller, and 2-pin power connector ready to install.
This model uses a fixed 2-pin connector; no other connector options are offered for the MGT5012XB-W10.
It draws 0.19 amps from a 12 volt rail, so the fan runs within standard motherboard or graphics-card header limits.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?