Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
OEM Industries
A compact 12 V 0.19 A fan and heatsink with nine blades and a two-pin connector for graphics-card cooling
This 12V 0.19A cooler combines a nine-blade fan with a heatsink for component thermal management. The two-wire power connector delivers fixed-speed operation without pulse-width modulation control. It is intended for builders fitting a compact air-cooling solution onto a graphics card or similar add-in board. The two-tone finish distinguishes the unit visually inside a chassis.
Verify that the target board provides a two-pin 12V header rated for at least 0.19A before ordering. Confirm physical space around the component slot so the heatsink and fan assembly can sit without fouling adjacent slots, capacitors or cable routing. The fixed-speed design means the fan runs continuously whenever the header is powered. No four-pin PWM or three-pin tachometer signal is supported by this connector.
The aluminium heatsink draws heat from the component base while the nine-blade fan moves air across the fins. Two-pin power simplifies wiring but removes speed monitoring and automatic curve control. The 12V 0.19A rating keeps current draw low for standard headers. Daily use brings constant airflow noise at full voltage with no software-adjustable quiet mode.
| Model | MGT5012XB-W10 |
|---|---|
| Color | 2-Tone |
| Type | Fan & Heatsinks |
| Power Connector | 2 Pin |
| LED | No |
The package contains the cooling fan with heatsink, 9-blade impeller, and 2-pin power connector ready to install.
This model uses a fixed 2-pin connector; no other connector options are offered for the MGT5012XB-W10.
It draws 0.19 amps from a 12 volt rail, so the fan runs within standard motherboard or graphics-card header limits.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?