Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 240-pin DDR3L UDIMM module, no heat spreader

OWC

OWC 4GB DDR3L 1600MHz CL11 ECC UDIMM 1E6T32R804GB

SKU CH-KQDW-MBS35

4GB DDR3L 1600MHz CL11 ECC unbuffered UDIMM for compatible Supermicro motherboards

  • Capacity4GB
  • Type240-Pin DDR3L ECC UDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection guards data integrity on supported Supermicro boards
  • DDR3L 1600MHz CL11 speed boosts system responsiveness
  • Low 1.35V operation reduces power draw and heat
  • 240-pin UDIMM fits desktop, workstation and server slots
  • JEDEC and RoHS compliance ensures a warranty-safe upgrade

OWC 4GB DDR3L ECC UDIMM

This 4GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It uses a 240-pin unbuffered UDIMM form factor with ECC error correction. The 2Rx8 rank configuration meets JEDEC and RoHS standards for desktop, workstation and server platforms.

For Supermicro A1SA7 and A1SAM boards

The memory is validated for Supermicro motherboards including A1SA7-2750F, A1SAM-2550F, A1SAM-2750F, A1SRM-2558F and A1SRM-2758F. Builders needing non-ECC modules or higher densities should look elsewhere. Systems requiring registered DIMMs or different pin counts are not compatible.

Single 4GB stick with ECC headroom

One module adds 4GB of error-correcting capacity to supported Supermicro platforms. It handles typical desktop and light server workloads within the single-slot limit. Larger datasets or multi-channel configurations will require additional modules beyond this single unit.

Prednosti

  • ECC protection guards data integrity on supported Supermicro boards
  • DDR3L 1600MHz CL11 speed boosts system responsiveness
  • Low 1.35V operation reduces power draw and heat
  • 240-pin UDIMM fits desktop, workstation and server slots
  • JEDEC and RoHS compliance ensures a warranty-safe upgrade

Špecifikácie

BrandOWC
Part Number1E6T32R804GB
Capacity4GB
Type240-Pin DDR3L ECC UDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard A1SA7-2750F
Supermicro Motherboard A1SAM-2550F
Supermicro Motherboard A1SAM-2750F
Supermicro Motherboard A1SRM-2558F
Supermicro Motherboard A1SRM-2758F

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Which motherboard must I already have for this module to fit?

This 240-pin DDR3L ECC UDIMM is validated for Supermicro boards A1SA7-2750F, A1SAM-2550F, A1SAM-2750F, A1SRM-2558F and A1SRM-2758F.

Can I mix this 1.35 V DDR3L stick with older 1.5 V DDR3 modules?

The motherboard will run all installed DIMMs at the lowest common voltage, so 1.5 V modules will drop to 1.35 V if the platform supports DDR3L.

How do I confirm the stick is running at its rated 1600 MHz and CL11 after installation?

Open the BIOS or a system-information utility; the memory summary should report 1600 MHz, CL11 timing and ECC active.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.