Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 240-pin DDR3L UDIMM module, no heat spreader

OWC

OWC 4GB DDR3L 1600MHz CL11 ECC UDIMM 1E6T32R804GB

SKU CH-KQDW-MBS35

4GB DDR3L 1600MHz CL11 ECC unbuffered UDIMM for compatible Supermicro motherboards

  • Capacity4GB
  • Type240-Pin DDR3L ECC UDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection guards data integrity on supported Supermicro boards
  • DDR3L 1600MHz CL11 speed boosts system responsiveness
  • Low 1.35V operation reduces power draw and heat
  • 240-pin UDIMM fits desktop, workstation and server slots
  • JEDEC and RoHS compliance ensures a warranty-safe upgrade

OWC 4GB DDR3L ECC UDIMM

This 4GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It uses a 240-pin unbuffered UDIMM form factor with ECC error correction. The 2Rx8 rank configuration meets JEDEC and RoHS standards for desktop, workstation and server platforms.

For Supermicro A1SA7 and A1SAM boards

The memory is validated for Supermicro motherboards including A1SA7-2750F, A1SAM-2550F, A1SAM-2750F, A1SRM-2558F and A1SRM-2758F. Builders needing non-ECC modules or higher densities should look elsewhere. Systems requiring registered DIMMs or different pin counts are not compatible.

Single 4GB stick with ECC headroom

One module adds 4GB of error-correcting capacity to supported Supermicro platforms. It handles typical desktop and light server workloads within the single-slot limit. Larger datasets or multi-channel configurations will require additional modules beyond this single unit.

Přednosti

  • ECC protection guards data integrity on supported Supermicro boards
  • DDR3L 1600MHz CL11 speed boosts system responsiveness
  • Low 1.35V operation reduces power draw and heat
  • 240-pin UDIMM fits desktop, workstation and server slots
  • JEDEC and RoHS compliance ensures a warranty-safe upgrade

Specifikace

BrandOWC
Part Number1E6T32R804GB
Capacity4GB
Type240-Pin DDR3L ECC UDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard A1SA7-2750F
Supermicro Motherboard A1SAM-2550F
Supermicro Motherboard A1SAM-2750F
Supermicro Motherboard A1SRM-2558F
Supermicro Motherboard A1SRM-2758F

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Which motherboard must I already have for this module to fit?

This 240-pin DDR3L ECC UDIMM is validated for Supermicro boards A1SA7-2750F, A1SAM-2550F, A1SAM-2750F, A1SRM-2558F and A1SRM-2758F.

Can I mix this 1.35 V DDR3L stick with older 1.5 V DDR3 modules?

The motherboard will run all installed DIMMs at the lowest common voltage, so 1.5 V modules will drop to 1.35 V if the platform supports DDR3L.

How do I confirm the stick is running at its rated 1600 MHz and CL11 after installation?

Open the BIOS or a system-information utility; the memory summary should report 1600 MHz, CL11 timing and ECC active.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.