暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3L UDIMM module, no heat spreader

OWC

OWC 4GB DDR3L 1600MHz CL11 ECC UDIMM 1E6T32R804GB

SKU CH-KQDW-MBS35

4GB DDR3L 1600MHz CL11 ECC unbuffered UDIMM for compatible Supermicro motherboards

  • Capacity4GB
  • Type240-Pin DDR3L ECC UDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection guards data integrity on supported Supermicro boards
  • DDR3L 1600MHz CL11 speed boosts system responsiveness
  • Low 1.35V operation reduces power draw and heat
  • 240-pin UDIMM fits desktop, workstation and server slots
  • JEDEC and RoHS compliance ensures a warranty-safe upgrade

OWC 4GB DDR3L ECC UDIMM

This 4GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It uses a 240-pin unbuffered UDIMM form factor with ECC error correction. The 2Rx8 rank configuration meets JEDEC and RoHS standards for desktop, workstation and server platforms.

For Supermicro A1SA7 and A1SAM boards

The memory is validated for Supermicro motherboards including A1SA7-2750F, A1SAM-2550F, A1SAM-2750F, A1SRM-2558F and A1SRM-2758F. Builders needing non-ECC modules or higher densities should look elsewhere. Systems requiring registered DIMMs or different pin counts are not compatible.

Single 4GB stick with ECC headroom

One module adds 4GB of error-correcting capacity to supported Supermicro platforms. It handles typical desktop and light server workloads within the single-slot limit. Larger datasets or multi-channel configurations will require additional modules beyond this single unit.

特長

  • ECC protection guards data integrity on supported Supermicro boards
  • DDR3L 1600MHz CL11 speed boosts system responsiveness
  • Low 1.35V operation reduces power draw and heat
  • 240-pin UDIMM fits desktop, workstation and server slots
  • JEDEC and RoHS compliance ensures a warranty-safe upgrade

仕様

BrandOWC
Part Number1E6T32R804GB
Capacity4GB
Type240-Pin DDR3L ECC UDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard A1SA7-2750F
Supermicro Motherboard A1SAM-2550F
Supermicro Motherboard A1SAM-2750F
Supermicro Motherboard A1SRM-2558F
Supermicro Motherboard A1SRM-2758F

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Which motherboard must I already have for this module to fit?

This 240-pin DDR3L ECC UDIMM is validated for Supermicro boards A1SA7-2750F, A1SAM-2550F, A1SAM-2750F, A1SRM-2558F and A1SRM-2758F.

Can I mix this 1.35 V DDR3L stick with older 1.5 V DDR3 modules?

The motherboard will run all installed DIMMs at the lowest common voltage, so 1.5 V modules will drop to 1.35 V if the platform supports DDR3L.

How do I confirm the stick is running at its rated 1600 MHz and CL11 after installation?

Open the BIOS or a system-information utility; the memory summary should report 1600 MHz, CL11 timing and ECC active.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。