Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Small rectangular board with 2.0 inch IPS screen, four buttons, RGB LED, female headers

Pimoroni

Pimoroni Pico Display Pack 2.0 320x240 IPS LCD development board

SKU CH-F241-NNFZN

A 320×240 IPS LCD with four tactile buttons and an RGB LED that attaches directly to Raspberry Pi Pico without soldering

  • 18-bit colour depth for 65K vivid colours
  • 320x240 IPS LCD at 220 PPI sharp detail
  • Four tactile buttons for direct human input
  • On-board RGB LED for status or notifications
  • Pre-soldered headers attach to Pico with no soldering

Pico Display Pack 2.0

This 2.0 inch IPS LCD adds a 320x240 pixel colour screen to a Raspberry Pi Pico or Pico W. It ships fully assembled with pre-soldered female headers and includes four tactile buttons plus an RGB LED. No soldering is needed if the Pico already has header pins fitted. The 18-bit panel delivers 65K colours at roughly 220 PPI for sharp text and graphics.

Suitable for makers building compact GUIs

Developers who need a ready-to-use display with integrated controls for Pico-based projects will find this pack convenient. It is not suited for builds that require a larger viewing area, higher resolution, or a different interface such as HDMI or eDP. Buyers wanting touch input or an on-board microcontroller should look elsewhere.

320x240 IPS panel with pre-soldered headers

The 320 by 240 pixel IPS panel and factory-fitted female headers decide fit. They match the Pico pinout directly, so the board stacks without wiring. Confirm your Pico has male headers installed before purchase.

Prednosti

  • 18-bit colour depth for 65K vivid colours
  • 320x240 IPS LCD at 220 PPI sharp detail
  • Four tactile buttons for direct human input
  • On-board RGB LED for status or notifications
  • Pre-soldered headers attach to Pico with no soldering

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

Does the 2.0-inch 320x240 IPS display generate noticeable heat or draw significant power when running continuously?

The small IPS panel and on-board RGB LED draw very little current, so heat and power consumption remain minimal during all-day operation.

What must I already own to use this pack, and does it require any soldering?

You need a Raspberry Pi Pico or Pico W with header pins fitted; the pack ships with pre-soldered female headers so no soldering is required.

Will the four tactile buttons and RGB LED still be accessible if I stack another HAT on top of my Pico?

The buttons and LED sit on the display board itself, so they remain usable unless a second add-on physically covers the front face.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.