Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small rectangular board with 2.0 inch IPS screen, four buttons, RGB LED, female headers

Pimoroni

Pimoroni Pico Display Pack 2.0 320x240 IPS LCD development board

SKU CH-F241-NNFZN

A 320×240 IPS LCD with four tactile buttons and an RGB LED that attaches directly to Raspberry Pi Pico without soldering

  • 18-bit colour depth for 65K vivid colours
  • 320x240 IPS LCD at 220 PPI sharp detail
  • Four tactile buttons for direct human input
  • On-board RGB LED for status or notifications
  • Pre-soldered headers attach to Pico with no soldering

Pico Display Pack 2.0

This 2.0 inch IPS LCD adds a 320x240 pixel colour screen to a Raspberry Pi Pico or Pico W. It ships fully assembled with pre-soldered female headers and includes four tactile buttons plus an RGB LED. No soldering is needed if the Pico already has header pins fitted. The 18-bit panel delivers 65K colours at roughly 220 PPI for sharp text and graphics.

Suitable for makers building compact GUIs

Developers who need a ready-to-use display with integrated controls for Pico-based projects will find this pack convenient. It is not suited for builds that require a larger viewing area, higher resolution, or a different interface such as HDMI or eDP. Buyers wanting touch input or an on-board microcontroller should look elsewhere.

320x240 IPS panel with pre-soldered headers

The 320 by 240 pixel IPS panel and factory-fitted female headers decide fit. They match the Pico pinout directly, so the board stacks without wiring. Confirm your Pico has male headers installed before purchase.

Pluspunten

  • 18-bit colour depth for 65K vivid colours
  • 320x240 IPS LCD at 220 PPI sharp detail
  • Four tactile buttons for direct human input
  • On-board RGB LED for status or notifications
  • Pre-soldered headers attach to Pico with no soldering

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Does the 2.0-inch 320x240 IPS display generate noticeable heat or draw significant power when running continuously?

The small IPS panel and on-board RGB LED draw very little current, so heat and power consumption remain minimal during all-day operation.

What must I already own to use this pack, and does it require any soldering?

You need a Raspberry Pi Pico or Pico W with header pins fitted; the pack ships with pre-soldered female headers so no soldering is required.

Will the four tactile buttons and RGB LED still be accessible if I stack another HAT on top of my Pico?

The buttons and LED sit on the display board itself, so they remain usable unless a second add-on physically covers the front face.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.