Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
A silver 2.5 inch U.2 15mm enterprise SSD with gold connectors

Solidigm

Solidigm D7-P5520 7.68TB U.2 15mm enterprise SSD SSDPF2KX076T1N1

SKU CH-7F5V-74B7D MPN SSDPF2KX076T1N1

Enterprise U.2 15mm SSD with 7.68TB of 144L TLC 3D NAND, PCIe 4.0 x4, 7100 MBps read, 4200 MBps write, 2,000,000-hour MTBF

  • Form FactorU.2 15mm
  • Capacity7.68TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 7100 MBps
  • Max Sequential WriteUp to 4200 MBps

Options 7.68TB, U.2 15mm, Non-OPAL

Zobraziť ďalších 2 konfigurácií
  • Massive 7.68 TB capacity stores vast datasets
  • PCIe 4.0 x4 interface delivers up to 7100 MB/s sequential reads
  • 144-layer TLC 3D NAND enables up to 4200 MB/s sequential writes
  • 2,000,000-hour MTBF ensures long-term data-centre reliability
  • 1000 G shock and 2.17 GRMS vibration resistance protects data integrity

Enterprise U.2 15mm 7.68TB drive

The Solidigm D7-P5520 is a 7.68TB enterprise SSD built for 2.5-inch U.2 bays with a 15mm z-height. It connects through a PCIe 4.0 x4 interface and uses 144L TLC 3D NAND. Sequential reads reach up to 7100 MBps and writes up to 4200 MBps. The drive carries a 2,000,000-hour MTBF rating and is rated for 1,000 G shock at 0.5 msec.

Fits dense read-heavy servers.

This drive suits data-centre nodes that need high-capacity, read-optimised storage in a standard 15mm U.2 slot. It also supports health reporting over PCIe and SMBus without interrupting I/O, plus concurrent TRIM and expanded LBA formats for metadata handling. Builders whose chassis only accept 7mm U.2 or M.2 form factors cannot use this 15mm module.

Deciding spec: 15mm U.2 form factor

The single specification that determines fitment is the 15mm U.2 form factor. Verify that the server or storage array explicitly supports 15mm 2.5-inch U.2 drives before ordering.

Prednosti

  • Massive 7.68 TB capacity stores vast datasets
  • PCIe 4.0 x4 interface delivers up to 7100 MB/s sequential reads
  • 144-layer TLC 3D NAND enables up to 4200 MB/s sequential writes
  • 2,000,000-hour MTBF ensures long-term data-centre reliability
  • 1000 G shock and 2.17 GRMS vibration resistance protects data integrity

Špecifikácie

BrandSolidigm
SeriesD7-P5520
ModelD7-P5520
Form FactorU.2 15mm
Capacity7.68TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 7100 MBps
Max Sequential WriteUp to 4200 MBps
MTBF2,000,000 hours
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Prepravná hmotnosť0.45 kg
Rozmery balenia203 × 152 × 127 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does the 7.68TB D7-P5520 throttle under sustained write workloads?

Sequential write is rated up to 4200 MBps; sustained use will stay within that limit and the drive's thermal design for U.2 15mm bays.

How much heat and power does the 15mm U.2 drive produce during all-day operation?

The PCIe 4.0 x4 interface and 144L TLC NAND are built for data-centre thermal envelopes; typical steady-state power fits standard 2.5-inch U.2 cooling.

What host connector and bus does the SSDPF2KX076T1N1 require?

It needs a U.2 backplane wired for PCI-Express 4.0 x4; the 15mm height also requires a bay that accepts 15mm drives.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.