STARTECH SATSASBP425 4-bay 2.5in SATA SAS mobile rack backplane ssd accessory
- Black
- SATA I/II/III/SAS
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
STARTECH
Adds a hot-swappable 2.5in SATA drive bay to any free PCI expansion slot
Model PCI Expansion Card Slot
Option 1-Bay (2.5in SATA)
This StarTech S25SLOTR installs a 2.5in SATA drive into a rear PCI expansion slot for hot-swappable access. The trayless aluminum and steel enclosure connects via standard SATA data and power cables and supports drives up to 500 GB. A latchable door and LED indicator show power and activity status.
Builders who want quick, tool-less access to one 2.5in SATA drive from the back of a chassis will find this bay useful. It is not suited for users who need to install more than one drive in the same slot. The unit also does not support drives larger than the stated 500 GB capacity limit.
The bay passes the native SATA I/II/III signal through to the host with a maximum throughput of 6 Gbps. This single specification determines whether the drive you plan to use can run at its rated speed.
| Brand | StarTech.com |
|---|---|
| Model | S25SLOTR |
| Color | Black |
| Mobile Rack Drives Support | 1 x 2.5" Drive to PCI Slot |
| Mobile Rack Interface | SATA I/II/III |
| Specifications | Max. HD Capacity: 500 GB Enclosure Type: Aluminum and Steel Compatible Drives: 2.5" SATA Host Connectors: 1 - 7 pin SATA DATA Male Host Connectors: 1 - 15 pin SATA Power Male Drive Connectors: 1 - 7 pin SATA DATA Female Drive Connectors: 1 - 15 pin SATA Power Female |
| Features | Completely OS Independent Door mounted LED indicator for Power and HD Activity, allows you to visually observe enclosure status Driver free support and tool-less design for HD installation Latchable door Supports almost all 2.5in hard drives; 12mm high drives not supported Supports hot swap hard drive installations Supports maximum data transfer rates up to 3.0 Gbps (using SATA II drive) Supports SATA II hard drives, backward compatible with SATA 150 hard drives The maximum supported hard drive capacity is 500GB Vented aluminum and steel enclosure |
| Prepravná hmotnosť | 0.23 kg |
| Rozmery balenia | 160 × 134 × 32 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The 6 Gbps SATA III rating lets a 2.5in SATA SSD or hard drive run at its full native speed through the PCI slot, provided the motherboard SATA port also supports 6 Gbps.
The bay uses SATA I, II and III and caps at the SATA III maximum of 6 Gbps when connected to a matching motherboard port.
It requires one free PCI expansion slot at the rear, a 7-pin SATA data cable and a 15-pin SATA power cable from the motherboard or PSU.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?