Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with M.2 slot and SATA port, two metal brackets included

Syba

Syba SI-ADA40083 M.2 to 2.5" SATA expansion card

SKU CH-JXQC-Z4AFH MPN SI-ADA40083

Adapts M.2 B-key SSDs to a 2.5" SATA drive bay with full-height and low-profile brackets included

  • External Ports1 x SATA III
  • SpecificationsM.2(NGFF) to SATAIII Card M.2 Specification Revision 0.9 Ser
  • Weight0.1
  • Package ContentsM.2 to SATA Adapter User Manual Set of M.2 Mounting Screws S
  • Converts M.2 B-key SSDs to standard 2.5" SATA
  • Fits 22×30, 22×42 and 22×60 M.2 modules
  • Includes full-height and low-profile brackets for any case
  • Driver-free installation enables immediate use
  • Supports SATA 3/6 Gbps speeds for fast data transfer

M.2 B-Key to SATA Adapter Card

The Syba SI-ADA40083 converts a M.2 B-key module into a standard 2.5-inch SATA drive. It mounts in a PCI slot bracket and connects to a motherboard SATA port. No driver installation is required and the card supports system boot. Both full-height and low-profile brackets are included.

Suits SATA M.2 modules only

This card works with M.2 B-key SSDs that use the SATA protocol in 2230, 2242 or 2260 lengths. Builders who need to install a 2.5-inch drive in a system with only M.2 slots cannot use this adapter. It also does not support M-key modules or longer 2280 cards. The package supplies mounting screws and both bracket sizes for flexible case fit.

M.2 B-key requirement

The single specification that decides compatibility is the M.2 B-key interface. Only B-key SATA modules in the three supported lengths will function. Any other keying or protocol will not work with this card.

Prednosti

  • Converts M.2 B-key SSDs to standard 2.5" SATA
  • Fits 22×30, 22×42 and 22×60 M.2 modules
  • Includes full-height and low-profile brackets for any case
  • Driver-free installation enables immediate use
  • Supports SATA 3/6 Gbps speeds for fast data transfer

Špecifikácie

BrandSYBA
ModelSI-ADA40083
External Ports1 x SATA III
SpecificationsM.2(NGFF) to SATAIII Card
M.2 Specification Revision 0.9
Serial ATA Specification Revision 3.2
Supports M.2 Card Sizes: 22*30, 22*42, 22*60
Supports M.2 B Key Card Type
Supports High-Speed SATA 3/6 Gbps Interface
Port: Standard SATA 22 Pin Connector
Weight0.1
Package ContentsM.2 to SATA Adapter
User Manual
Set of M.2 Mounting Screws
Standar Size Bracket
Low Profile Bracket
Prepravná hmotnosť0.10 kg
Rozmery balenia178 × 149 × 42 mm

Otázky k tomuto produktu

Does the SATA 3.2 interface cap sustained throughput when I run the drive all day?

The adapter passes SATA 3.2 signals directly, so the drive itself sets the sustained limit rather than the card.

Will the card add noticeable heat or noise inside a closed case?

The board has no active cooling and draws minimal power, so it adds virtually no heat or noise.

Which M.2 drive do I need to already own for this to work?

You need a B-key M.2 SATA drive in 2230, 2242 or 2260 form factor.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.