Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with M.2 slot and SATA port, two metal brackets included

Syba

Syba SI-ADA40083 M.2 to 2.5" SATA expansion card

SKU CH-JXQC-Z4AFH MPN SI-ADA40083

Adapts M.2 B-key SSDs to a 2.5" SATA drive bay with full-height and low-profile brackets included

  • External Ports1 x SATA III
  • SpecificationsM.2(NGFF) to SATAIII Card M.2 Specification Revision 0.9 Ser
  • Weight0.1
  • Package ContentsM.2 to SATA Adapter User Manual Set of M.2 Mounting Screws S
  • Converts M.2 B-key SSDs to standard 2.5" SATA
  • Fits 22×30, 22×42 and 22×60 M.2 modules
  • Includes full-height and low-profile brackets for any case
  • Driver-free installation enables immediate use
  • Supports SATA 3/6 Gbps speeds for fast data transfer

M.2 B-Key to SATA Adapter Card

The Syba SI-ADA40083 converts a M.2 B-key module into a standard 2.5-inch SATA drive. It mounts in a PCI slot bracket and connects to a motherboard SATA port. No driver installation is required and the card supports system boot. Both full-height and low-profile brackets are included.

Suits SATA M.2 modules only

This card works with M.2 B-key SSDs that use the SATA protocol in 2230, 2242 or 2260 lengths. Builders who need to install a 2.5-inch drive in a system with only M.2 slots cannot use this adapter. It also does not support M-key modules or longer 2280 cards. The package supplies mounting screws and both bracket sizes for flexible case fit.

M.2 B-key requirement

The single specification that decides compatibility is the M.2 B-key interface. Only B-key SATA modules in the three supported lengths will function. Any other keying or protocol will not work with this card.

Punti di forza

  • Converts M.2 B-key SSDs to standard 2.5" SATA
  • Fits 22×30, 22×42 and 22×60 M.2 modules
  • Includes full-height and low-profile brackets for any case
  • Driver-free installation enables immediate use
  • Supports SATA 3/6 Gbps speeds for fast data transfer

Caratteristiche tecniche

BrandSYBA
ModelSI-ADA40083
External Ports1 x SATA III
SpecificationsM.2(NGFF) to SATAIII Card
M.2 Specification Revision 0.9
Serial ATA Specification Revision 3.2
Supports M.2 Card Sizes: 22*30, 22*42, 22*60
Supports M.2 B Key Card Type
Supports High-Speed SATA 3/6 Gbps Interface
Port: Standard SATA 22 Pin Connector
Weight0.1
Package ContentsM.2 to SATA Adapter
User Manual
Set of M.2 Mounting Screws
Standar Size Bracket
Low Profile Bracket
Peso di spedizione0.10 kg
Dimensioni del pacco178 × 149 × 42 mm

Domande su questo articolo

Does the SATA 3.2 interface cap sustained throughput when I run the drive all day?

The adapter passes SATA 3.2 signals directly, so the drive itself sets the sustained limit rather than the card.

Will the card add noticeable heat or noise inside a closed case?

The board has no active cooling and draws minimal power, so it adds virtually no heat or noise.

Which M.2 drive do I need to already own for this to work?

You need a B-key M.2 SATA drive in 2230, 2242 or 2260 form factor.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.