Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Thermal Grizzly Putty Pro 30g tub grey putty with spatulas

Thermal Grizzly

Thermal Grizzly TG-P-P-030 Putty Pro 30g thermal putty

SKU CH-9VFT-10VVP

Electrically non-conductive putty replaces thermal pads on GPUs, filling gaps from 0.2 mm to 3.0 mm with excellent conductivity for cards like the GTX 1060 or RTX 4090

  • Specifications30 grams
  • FeaturesThermal Grizzly Putty is an electrically non-conductive alte

Size 30g Pro

  • 30g Basic
  • 30g Advance
  • 30g Pro

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Electrically non-conductive formula protects sensitive GPU components
  • Flexible gap filler covers 0.2 mm to 3.0 mm height differences
  • Replaces multiple thermal pad thicknesses with single application
  • Pro variant delivers excellent thermal conductivity for demanding loads
  • 30 g container sufficient for GTX 1060 or RTX 4090 VRAM and VRM

Thermal putty for GPU pad replacement

Thermal Grizzly TG-P-P-030 Putty Pro is a 30g electrically non-conductive compound designed to replace factory thermal pads on graphics cards. It fills gaps between the PCB and cooler, compensating for height differences from 0.2 mm to 3.0 mm. The putty suits GPU modifications and cooler conversions where standard pads vary in thickness.

Included spatulas enable precise application

Two spatulas are supplied for spreading the putty over large areas or tight component clusters. This tooling lets builders match the original pad coverage on VRAM and VRM zones without improvising. The Pro variant delivers excellent thermal conductivity for demanding loads, while the flexible consistency adapts to uneven surfaces across the board.

Check card size and pad zones before ordering

One 30g container covers a smaller card such as a GTX 1060 or the front-side memory and regulators on an RTX 4090. Larger boards or active backplates may need additional putty. Verify the thickness range of your existing pads falls within the 0.2–3.0 mm window. Ensure you are comfortable disassembling the cooler and cleaning old material thoroughly.

Prednosti

  • Electrically non-conductive formula protects sensitive GPU components
  • Flexible gap filler covers 0.2 mm to 3.0 mm height differences
  • Replaces multiple thermal pad thicknesses with single application
  • Pro variant delivers excellent thermal conductivity for demanding loads
  • 30 g container sufficient for GTX 1060 or RTX 4090 VRAM and VRM

Špecifikácie

BrandThermal Grizzly
ModelTG-P-P-030
Part NumberTG-P-P-030-R
Specifications30 grams
FeaturesThermal Grizzly Putty is an electrically non-conductive alternative to traditional thermal pads, specifically designed for GPU modifications and the replacement of thermal pads between the PCB and the cooler.

Otázky k tomuto produktu

Will the putty dry out and need replacing after a year?

The material stays pliable and does not cure, so it does not require scheduled replacement.

What gap thickness can the putty fill before thermal performance drops?

It compensates for height differences from 0.2 mm to 3.0 mm, maintaining contact across that range.

Does the putty get hot enough to affect nearby components during all-day GPU load?

It is electrically non-conductive and designed for GPU VRAM and VRM areas, transferring heat to the cooler without adding thermal resistance.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.