Thermal Grizzly
Thermal Grizzly TG-P-P-030 Putty Pro 30g thermal putty
Electrically non-conductive putty replaces thermal pads on GPUs, filling gaps from 0.2 mm to 3.0 mm with excellent conductivity for cards like the GTX 1060 or RTX 4090
- Specifications30 grams
- FeaturesThermal Grizzly Putty is an electrically non-conductive alte
Size 30g Pro
- 30g Basic
- 30g Advance
- 30g Pro
Durchgestrichene Varianten existieren, sind hier aber nicht vorrätig.
- Electrically non-conductive formula protects sensitive GPU components
- Flexible gap filler covers 0.2 mm to 3.0 mm height differences
- Replaces multiple thermal pad thicknesses with single application
- Pro variant delivers excellent thermal conductivity for demanding loads
- 30 g container sufficient for GTX 1060 or RTX 4090 VRAM and VRM
Thermal putty for GPU pad replacement
Thermal Grizzly TG-P-P-030 Putty Pro is a 30g electrically non-conductive compound designed to replace factory thermal pads on graphics cards. It fills gaps between the PCB and cooler, compensating for height differences from 0.2 mm to 3.0 mm. The putty suits GPU modifications and cooler conversions where standard pads vary in thickness.
Included spatulas enable precise application
Two spatulas are supplied for spreading the putty over large areas or tight component clusters. This tooling lets builders match the original pad coverage on VRAM and VRM zones without improvising. The Pro variant delivers excellent thermal conductivity for demanding loads, while the flexible consistency adapts to uneven surfaces across the board.
Check card size and pad zones before ordering
One 30g container covers a smaller card such as a GTX 1060 or the front-side memory and regulators on an RTX 4090. Larger boards or active backplates may need additional putty. Verify the thickness range of your existing pads falls within the 0.2–3.0 mm window. Ensure you are comfortable disassembling the cooler and cleaning old material thoroughly.
Besonderheiten
- Electrically non-conductive formula protects sensitive GPU components
- Flexible gap filler covers 0.2 mm to 3.0 mm height differences
- Replaces multiple thermal pad thicknesses with single application
- Pro variant delivers excellent thermal conductivity for demanding loads
- 30 g container sufficient for GTX 1060 or RTX 4090 VRAM and VRM
Technische Daten
| Brand | Thermal Grizzly |
|---|---|
| Model | TG-P-P-030 |
| Part Number | TG-P-P-030-R |
| Specifications | 30 grams |
| Features | Thermal Grizzly Putty is an electrically non-conductive alternative to traditional thermal pads, specifically designed for GPU modifications and the replacement of thermal pads between the PCB and the cooler. |
Fragen zu diesem Artikel
Will the putty dry out and need replacing after a year?
The material stays pliable and does not cure, so it does not require scheduled replacement.
What gap thickness can the putty fill before thermal performance drops?
It compensates for height differences from 0.2 mm to 3.0 mm, maintaining contact across that range.
Does the putty get hot enough to affect nearby components during all-day GPU load?
It is electrically non-conductive and designed for GPU VRAM and VRM areas, transferring heat to the cooler without adding thermal resistance.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.0000105BTC
Auf Lager