نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Thermal Grizzly Putty Pro 30g tub grey putty with spatulas

Thermal Grizzly

Thermal Grizzly TG-P-P-030 Putty Pro 30g thermal putty

SKU CH-9VFT-10VVP

Electrically non-conductive putty replaces thermal pads on GPUs, filling gaps from 0.2 mm to 3.0 mm with excellent conductivity for cards like the GTX 1060 or RTX 4090

  • Specifications30 grams
  • FeaturesThermal Grizzly Putty is an electrically non-conductive alte

Size 30g Pro

  • 30g Basic
  • 30g Advance
  • 30g Pro

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • Electrically non-conductive formula protects sensitive GPU components
  • Flexible gap filler covers 0.2 mm to 3.0 mm height differences
  • Replaces multiple thermal pad thicknesses with single application
  • Pro variant delivers excellent thermal conductivity for demanding loads
  • 30 g container sufficient for GTX 1060 or RTX 4090 VRAM and VRM

Thermal putty for GPU pad replacement

Thermal Grizzly TG-P-P-030 Putty Pro is a 30g electrically non-conductive compound designed to replace factory thermal pads on graphics cards. It fills gaps between the PCB and cooler, compensating for height differences from 0.2 mm to 3.0 mm. The putty suits GPU modifications and cooler conversions where standard pads vary in thickness.

Included spatulas enable precise application

Two spatulas are supplied for spreading the putty over large areas or tight component clusters. This tooling lets builders match the original pad coverage on VRAM and VRM zones without improvising. The Pro variant delivers excellent thermal conductivity for demanding loads, while the flexible consistency adapts to uneven surfaces across the board.

Check card size and pad zones before ordering

One 30g container covers a smaller card such as a GTX 1060 or the front-side memory and regulators on an RTX 4090. Larger boards or active backplates may need additional putty. Verify the thickness range of your existing pads falls within the 0.2–3.0 mm window. Ensure you are comfortable disassembling the cooler and cleaning old material thoroughly.

أبرز المميزات

  • Electrically non-conductive formula protects sensitive GPU components
  • Flexible gap filler covers 0.2 mm to 3.0 mm height differences
  • Replaces multiple thermal pad thicknesses with single application
  • Pro variant delivers excellent thermal conductivity for demanding loads
  • 30 g container sufficient for GTX 1060 or RTX 4090 VRAM and VRM

المواصفات

BrandThermal Grizzly
ModelTG-P-P-030
Part NumberTG-P-P-030-R
Specifications30 grams
FeaturesThermal Grizzly Putty is an electrically non-conductive alternative to traditional thermal pads, specifically designed for GPU modifications and the replacement of thermal pads between the PCB and the cooler.

أسئلة حول هذا المنتج

Will the putty dry out and need replacing after a year?

The material stays pliable and does not cure, so it does not require scheduled replacement.

What gap thickness can the putty fill before thermal performance drops?

It compensates for height differences from 0.2 mm to 3.0 mm, maintaining contact across that range.

Does the putty get hot enough to affect nearby components during all-day GPU load?

It is electrically non-conductive and designed for GPU VRAM and VRM areas, transferring heat to the cooler without adding thermal resistance.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.