Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Square thermal pad, 100mm sides, 1.0mm thick, soft grey silicone

Thermal Hero

Thermal Hero NEO Thermal Pad 100 x 100mm 1.0mm 12W/mK

SKU CH-9RTF-2TX9H

High-conductivity 12 W/mK thermal pad, 1.0 mm thick and 30 Shore softness for easy CPU, GPU or console installation

  • High thermal conductivity up to 12.0W/mK for efficient heat transfer
  • Medium-soft 30 Shore pads compress easily to fill surface gaps
  • Non-conductive and non-toxic with RoHS and REACH compliance
  • Suitable for CPU, GPU, IC and gaming console cooling
  • 0mm thick 100x100mm pad ready for custom cutting

12 W/mK thermal pad for CPUs GPUs and consoles

The Thermal Hero NEO pad measures 100 by 100 millimetres with a 1.0 millimetre thickness and delivers up to 12.0 W/mK thermal conductivity. It is designed for CPU, GPU, IC and gaming console cooling where a high-performance interface material is required.

Sustained load behaviour with 30 Shore softness

At 30 Shore the pad stays in the medium-soft range so it compresses evenly under clamping pressure and maintains low thermal resistance over long periods. The silicone construction resists corrosion and oxidation while remaining non-electrically conductive for stable operation at elevated temperatures.

Check gap thickness and electrical isolation needs

Verify that the 1.0 millimetre thickness matches the gap between your component and heatsink before ordering. Ensure the application does not require an electrically conductive interface because this pad is specifically non-conductive.

Prednosti

  • High thermal conductivity up to 12.0W/mK for efficient heat transfer
  • Medium-soft 30 Shore pads compress easily to fill surface gaps
  • Non-conductive and non-toxic with RoHS and REACH compliance
  • Suitable for CPU, GPU, IC and gaming console cooling
  • 0mm thick 100x100mm pad ready for custom cutting

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How loud or hot does the 12 W/mK pad get under sustained use?

The pad is a passive silicon component with no moving parts, so it produces no noise and generates no heat of its own; it simply conducts up to 12 W/mK away from the CPU, GPU or IC it contacts.

What must I already own to install the 100 × 100 mm, 1.0 mm pad?

You need a component with a mating surface large enough for the 100 mm square — such as a CPU heat-spreader, GPU die area or console IC — plus a heatsink or cold plate that clamps the pad at roughly 30 Shore compression.

Will the 1.0 mm thickness and 30 Shore softness work with the original cooler on an older GPU or console?

Yes; the medium-soft 30 Shore pad compresses to fill gaps on legacy heat-spreaders, and the 1.0 mm thickness matches many factory gap specifications on older graphics cards and PlayStation or Xbox boards.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.