Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Square thermal pad, 100mm sides, 1.0mm thick, soft grey silicone

Thermal Hero

Thermal Hero NEO Thermal Pad 100 x 100mm 1.0mm 12W/mK

SKU CH-9RTF-2TX9H

High-conductivity 12 W/mK thermal pad, 1.0 mm thick and 30 Shore softness for easy CPU, GPU or console installation

  • High thermal conductivity up to 12.0W/mK for efficient heat transfer
  • Medium-soft 30 Shore pads compress easily to fill surface gaps
  • Non-conductive and non-toxic with RoHS and REACH compliance
  • Suitable for CPU, GPU, IC and gaming console cooling
  • 0mm thick 100x100mm pad ready for custom cutting

12 W/mK thermal pad for CPUs GPUs and consoles

The Thermal Hero NEO pad measures 100 by 100 millimetres with a 1.0 millimetre thickness and delivers up to 12.0 W/mK thermal conductivity. It is designed for CPU, GPU, IC and gaming console cooling where a high-performance interface material is required.

Sustained load behaviour with 30 Shore softness

At 30 Shore the pad stays in the medium-soft range so it compresses evenly under clamping pressure and maintains low thermal resistance over long periods. The silicone construction resists corrosion and oxidation while remaining non-electrically conductive for stable operation at elevated temperatures.

Check gap thickness and electrical isolation needs

Verify that the 1.0 millimetre thickness matches the gap between your component and heatsink before ordering. Ensure the application does not require an electrically conductive interface because this pad is specifically non-conductive.

Přednosti

  • High thermal conductivity up to 12.0W/mK for efficient heat transfer
  • Medium-soft 30 Shore pads compress easily to fill surface gaps
  • Non-conductive and non-toxic with RoHS and REACH compliance
  • Suitable for CPU, GPU, IC and gaming console cooling
  • 0mm thick 100x100mm pad ready for custom cutting

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

How loud or hot does the 12 W/mK pad get under sustained use?

The pad is a passive silicon component with no moving parts, so it produces no noise and generates no heat of its own; it simply conducts up to 12 W/mK away from the CPU, GPU or IC it contacts.

What must I already own to install the 100 × 100 mm, 1.0 mm pad?

You need a component with a mating surface large enough for the 100 mm square — such as a CPU heat-spreader, GPU die area or console IC — plus a heatsink or cold plate that clamps the pad at roughly 30 Shore compression.

Will the 1.0 mm thickness and 30 Shore softness work with the original cooler on an older GPU or console?

Yes; the medium-soft 30 Shore pad compresses to fill gaps on legacy heat-spreaders, and the 1.0 mm thickness matches many factory gap specifications on older graphics cards and PlayStation or Xbox boards.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.