Systor SYSNVME-YL03PRO04 1-to-4 NVMe/SATA Duplicator 18GB/min
- Hard Drive Duplicat…
- 1 to 4
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Systor
Standalone duplicator copies or erases up to nine M.2 NVMe or SATA drives at 18 GB per minute
TARGET SIZE 1 to 09
DATA TRANSFER RATE 18.0GB/min [300MB/sec] NO HDD RACK
The Systor SYSNVME-YL03REG09 duplicates one source drive to up to nine targets without a host PC. It accepts M.2 modules in 2230, 2242, 2260 and 2280 form factors using B key, M key or B+M key interfaces. Optional adapters extend support to 2.5 inch and 3.5 inch SATA drives. The unit operates completely standalone with a single-button start.
Maximum throughput is 300 MB/s, which translates to roughly 18 GB per minute under ideal drive conditions. Actual speed depends on the read and write limits of the specific source and target media installed. The duplicator handles NVMe and SATA protocols on the M.2 slots but cannot exceed the bandwidth of the slowest drive in a session. Proprietary or unknown filesystem formats are copied sector-by-sector.
This device removes the need to tie up workstations or write custom scripts for mass deployment or sanitisation. It adds value when you regularly clone three or more drives per job and want consistent speed without degradation across all nine ports. Daisy-chaining multiple units lets you scale beyond nine targets. It is not suited for users who only occasionally duplicate a single drive or who require network-attached operation.
| Brand | Systor |
|---|---|
| Model | SYSNVME-YL03REG09 |
| Part Number | SYSNVME-YL03REG09 |
| Type | Hard Drive Duplicator |
| Target | 1 to 9 |
| Data Transfer Rate | 300MB/s |
| Operating Type | Standalone |
| Dimensions (H x W x D) | 18 x 8.25 x 6 |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The duplicator accepts 2230, 2242, 2260 and 2280 M.2 drives with B key, M key or B+M key. Optional adapters also allow 2.5" and 3.5" SATA SSD or HDD drives.
It represents a peak throughput of 300 MB/s. Actual speed varies with the read and write performance of the source and each target drive, and does not degrade as more targets are added.
The unit handles both NVMe PCIe and SATA M.2 drives. The internal transfer path is limited to 300 MB/s, so faster NVMe drives will be constrained to that ceiling.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?