אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Rectangular standalone duplicator with nine M.2 slots on top

Systor

Systor SYSNVME-YL03REG09 1-to-9 M.2 NVMe/SATA Duplicator 18GB/min

SKU CH-8RX2-QTP3M

Standalone duplicator copies or erases up to nine M.2 NVMe or SATA drives at 18 GB per minute

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)18 x 8.25 x 6

TARGET SIZE 1 to 09

DATA TRANSFER RATE 18.0GB/min [300MB/sec] NO HDD RACK

  • Standalone operation needs no PC or software
  • Copies up to 9 drives simultaneously at 18GB/min
  • Supports M.2 sizes 2230, 2242, 2260, 2280 with B, M, B+M keys
  • Optional adapters add 2.5" and 3.5" SATA drive compatibility
  • Downloadable event log records job results and drive details

Standalone M.2 Duplicator for High-Volume Cloning

The Systor SYSNVME-YL03REG09 duplicates one source drive to up to nine targets without a host PC. It accepts M.2 modules in 2230, 2242, 2260 and 2280 form factors using B key, M key or B+M key interfaces. Optional adapters extend support to 2.5 inch and 3.5 inch SATA drives. The unit operates completely standalone with a single-button start.

Transfer Rate and Interface Constraints

Maximum throughput is 300 MB/s, which translates to roughly 18 GB per minute under ideal drive conditions. Actual speed depends on the read and write limits of the specific source and target media installed. The duplicator handles NVMe and SATA protocols on the M.2 slots but cannot exceed the bandwidth of the slowest drive in a session. Proprietary or unknown filesystem formats are copied sector-by-sector.

Replaces Manual PC-Based Imaging Workflows

This device removes the need to tie up workstations or write custom scripts for mass deployment or sanitisation. It adds value when you regularly clone three or more drives per job and want consistent speed without degradation across all nine ports. Daisy-chaining multiple units lets you scale beyond nine targets. It is not suited for users who only occasionally duplicate a single drive or who require network-attached operation.

נקודות עיקריות

  • Standalone operation needs no PC or software
  • Copies up to 9 drives simultaneously at 18GB/min
  • Supports M.2 sizes 2230, 2242, 2260, 2280 with B, M, B+M keys
  • Optional adapters add 2.5" and 3.5" SATA drive compatibility
  • Downloadable event log records job results and drive details

מפרט טכני

BrandSystor
ModelSYSNVME-YL03REG09
Part NumberSYSNVME-YL03REG09
TypeHard Drive Duplicator
Target1 to 9
Data Transfer Rate300MB/s
Operating TypeStandalone
Dimensions (H x W x D)18 x 8.25 x 6

גרסאות נוספות של דגם זה

5 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

Which M.2 form factors does the SYSNVME-YL03REG09 support?

The duplicator accepts 2230, 2242, 2260 and 2280 M.2 drives with B key, M key or B+M key. Optional adapters also allow 2.5" and 3.5" SATA SSD or HDD drives.

What does the 18 GB per minute transfer rate mean in practice?

It represents a peak throughput of 300 MB/s. Actual speed varies with the read and write performance of the source and each target drive, and does not degrade as more targets are added.

What interface standard does the duplicator use and what does it cap?

The unit handles both NVMe PCIe and SATA M.2 drives. The internal transfer path is limited to 300 MB/s, so faster NVMe drives will be constrained to that ceiling.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.