Systor SYSNVME-YL03PRO04 1-to-4 NVMe/SATA Duplicator 18GB/min
- Hard Drive Duplicat…
- 1 to 4
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Systor
Standalone duplicator copies or erases up to nine M.2 NVMe or SATA drives at 18 GB per minute
TARGET SIZE 1 to 09
DATA TRANSFER RATE 18.0GB/min [300MB/sec] NO HDD RACK
The Systor SYSNVME-YL03REG09 duplicates one source drive to up to nine targets without a host PC. It accepts M.2 modules in 2230, 2242, 2260 and 2280 form factors using B key, M key or B+M key interfaces. Optional adapters extend support to 2.5 inch and 3.5 inch SATA drives. The unit operates completely standalone with a single-button start.
Maximum throughput is 300 MB/s, which translates to roughly 18 GB per minute under ideal drive conditions. Actual speed depends on the read and write limits of the specific source and target media installed. The duplicator handles NVMe and SATA protocols on the M.2 slots but cannot exceed the bandwidth of the slowest drive in a session. Proprietary or unknown filesystem formats are copied sector-by-sector.
This device removes the need to tie up workstations or write custom scripts for mass deployment or sanitisation. It adds value when you regularly clone three or more drives per job and want consistent speed without degradation across all nine ports. Daisy-chaining multiple units lets you scale beyond nine targets. It is not suited for users who only occasionally duplicate a single drive or who require network-attached operation.
| Brand | Systor |
|---|---|
| Model | SYSNVME-YL03REG09 |
| Part Number | SYSNVME-YL03REG09 |
| Type | Hard Drive Duplicator |
| Target | 1 to 9 |
| Data Transfer Rate | 300MB/s |
| Operating Type | Standalone |
| Dimensions (H x W x D) | 18 x 8.25 x 6 |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The duplicator accepts 2230, 2242, 2260 and 2280 M.2 drives with B key, M key or B+M key. Optional adapters also allow 2.5" and 3.5" SATA SSD or HDD drives.
It represents a peak throughput of 300 MB/s. Actual speed varies with the read and write performance of the source and each target drive, and does not degrade as more targets are added.
The unit handles both NVMe PCIe and SATA M.2 drives. The internal transfer path is limited to 300 MB/s, so faster NVMe drives will be constrained to that ceiling.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?