Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Two black vented 1U rack shelves with mounting hardware

TAURKENAM

TAURKENAM 2×1U Vented Rack Shelf 19×10×1.7 case accessory

SKU CH-8SGV-VXA6X

Vented 1U shelf pair fits 19-inch racks, includes mounting hardware for network and audio gear

  • Vented shelves improve airflow to keep equipment cooler
  • 1U height fits 19-inch racks while using minimal space
  • Sturdy construction supports daily use in IT and audio setups
  • Includes two shelves with screws and cage nuts for quick mounting
  • Cantilever design works with cases, stereo racks and network gear

Vented 1U rack shelf pair

Two vented 1U shelves fit standard 19-inch racks and measure 19.0 by 10.0 by 1.7. The open design promotes air circulation around mounted devices. Supplied mounting screws and cage nuts make installation quick.

Passive cooling for dense racks

Ventilation slots let hot air rise away from equipment without adding fan noise or power draw. The sturdy metal construction supports typical IT, networking and audio gear. Cantilever mounting keeps the front clear for cables.

Replaces solid shelves that trap heat

The jump is worth it when rack temperatures climb above safe limits or when fan noise must stay low. Buyers needing enclosed storage or higher load ratings should look elsewhere.

Poudarki

  • Vented shelves improve airflow to keep equipment cooler
  • 1U height fits 19-inch racks while using minimal space
  • Sturdy construction supports daily use in IT and audio setups
  • Includes two shelves with screws and cage nuts for quick mounting
  • Cantilever design works with cases, stereo racks and network gear

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How do I mount the 1U shelf to the 19-inch rack rails using the included cage nuts?

Snap each cage nut into the square holes on the front rails, align the shelf flanges, then drive the supplied screws through the flanges into the cage nuts; the step often missed is seating the cage nut fully before tightening the screw.

What upkeep will the vented steel shelves need over time?

Dust builds up in the ventilation slots, so vacuum or blow them out every few months; the mounting screws can loosen from vibration, so re-check torque during routine rack inspections.

At what load does the 10.0-inch deep cantilever shelf start to deflect noticeably?

The 1.7-inch high vented deck begins to bow once the centre load exceeds the shelf's rated capacity, so keep heavier gear close to the front rails and stay within the manufacturer's weight limit.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.