Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two black vented 1U rack shelves with mounting hardware

TAURKENAM

TAURKENAM 2×1U Vented Rack Shelf 19×10×1.7 case accessory

SKU CH-8SGV-VXA6X

Vented 1U shelf pair fits 19-inch racks, includes mounting hardware for network and audio gear

  • Vented shelves improve airflow to keep equipment cooler
  • 1U height fits 19-inch racks while using minimal space
  • Sturdy construction supports daily use in IT and audio setups
  • Includes two shelves with screws and cage nuts for quick mounting
  • Cantilever design works with cases, stereo racks and network gear

Vented 1U rack shelf pair

Two vented 1U shelves fit standard 19-inch racks and measure 19.0 by 10.0 by 1.7. The open design promotes air circulation around mounted devices. Supplied mounting screws and cage nuts make installation quick.

Passive cooling for dense racks

Ventilation slots let hot air rise away from equipment without adding fan noise or power draw. The sturdy metal construction supports typical IT, networking and audio gear. Cantilever mounting keeps the front clear for cables.

Replaces solid shelves that trap heat

The jump is worth it when rack temperatures climb above safe limits or when fan noise must stay low. Buyers needing enclosed storage or higher load ratings should look elsewhere.

Pluspunten

  • Vented shelves improve airflow to keep equipment cooler
  • 1U height fits 19-inch racks while using minimal space
  • Sturdy construction supports daily use in IT and audio setups
  • Includes two shelves with screws and cage nuts for quick mounting
  • Cantilever design works with cases, stereo racks and network gear

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

How do I mount the 1U shelf to the 19-inch rack rails using the included cage nuts?

Snap each cage nut into the square holes on the front rails, align the shelf flanges, then drive the supplied screws through the flanges into the cage nuts; the step often missed is seating the cage nut fully before tightening the screw.

What upkeep will the vented steel shelves need over time?

Dust builds up in the ventilation slots, so vacuum or blow them out every few months; the mounting screws can loosen from vibration, so re-check torque during routine rack inspections.

At what load does the 10.0-inch deep cantilever shelf start to deflect noticeably?

The 1.7-inch high vented deck begins to bow once the centre load exceeds the shelf's rated capacity, so keep heavier gear close to the front rails and stay within the manufacturer's weight limit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.