暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black vented 1U rack shelves with mounting hardware

TAURKENAM

TAURKENAM 2×1U Vented Rack Shelf 19×10×1.7 case accessory

SKU CH-8SGV-VXA6X

Vented 1U shelf pair fits 19-inch racks, includes mounting hardware for network and audio gear

  • Vented shelves improve airflow to keep equipment cooler
  • 1U height fits 19-inch racks while using minimal space
  • Sturdy construction supports daily use in IT and audio setups
  • Includes two shelves with screws and cage nuts for quick mounting
  • Cantilever design works with cases, stereo racks and network gear

Vented 1U rack shelf pair

Two vented 1U shelves fit standard 19-inch racks and measure 19.0 by 10.0 by 1.7. The open design promotes air circulation around mounted devices. Supplied mounting screws and cage nuts make installation quick.

Passive cooling for dense racks

Ventilation slots let hot air rise away from equipment without adding fan noise or power draw. The sturdy metal construction supports typical IT, networking and audio gear. Cantilever mounting keeps the front clear for cables.

Replaces solid shelves that trap heat

The jump is worth it when rack temperatures climb above safe limits or when fan noise must stay low. Buyers needing enclosed storage or higher load ratings should look elsewhere.

特長

  • Vented shelves improve airflow to keep equipment cooler
  • 1U height fits 19-inch racks while using minimal space
  • Sturdy construction supports daily use in IT and audio setups
  • Includes two shelves with screws and cage nuts for quick mounting
  • Cantilever design works with cases, stereo racks and network gear

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I mount the 1U shelf to the 19-inch rack rails using the included cage nuts?

Snap each cage nut into the square holes on the front rails, align the shelf flanges, then drive the supplied screws through the flanges into the cage nuts; the step often missed is seating the cage nut fully before tightening the screw.

What upkeep will the vented steel shelves need over time?

Dust builds up in the ventilation slots, so vacuum or blow them out every few months; the mounting screws can loosen from vibration, so re-check torque during routine rack inspections.

At what load does the 10.0-inch deep cantilever shelf start to deflect noticeably?

The 1.7-inch high vented deck begins to bow once the centre load exceeds the shelf's rated capacity, so keep heavier gear close to the front rails and stay within the manufacturer's weight limit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。